含双二氮杂萘酮结构聚芳醚酮热塑性树脂的合成与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(91860204);中央高校基本科研业务费项目(DUT20LAB305)


Synthesis and Properties of Poly(bisphthalazinone ether ketone) Thermoplastic Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以4,4’-双(氧基(1,4-苯撑))-双二氮杂萘-1(2H)酮-二苯醚(OBDHPZ)、4,4’-二氟二苯砜(DFS)和4,4’-二氟二苯酮(DFK)为单体,采用高温溶液缩聚法,通过调节DFK的含量,合成一系列含双二氮杂萘酮联苯结构聚芳醚酮(PBPESKs)热塑性树脂。通过核磁共振氢谱、红外光谱及元素分析表明所合成的聚合物结构与设计结构一致。PBPESKs系列聚合物的玻璃化转变温度在298~324 ℃之间,5%热失重温度在512~517 ℃之间,同时PBPESKs树脂在NMP、DMAc、氯仿等极性有机溶剂中具有良好的溶解性,并通过溶液浇筑制膜,PBPESKs聚合物薄膜的拉伸模量在1.85~1.92 GPa之间,断裂伸长率在12.6%~13.9%之间。

    Abstract:

    4,4′-(oxybis(4,1-phenylene))bis(phthalazin-1(2H)-one)-diphenyl ether (OBDHPZ), 4,4′-difluorodiphenyl sulfone (DFS) and 4, 4′-difluorobenzophenone (DFK) were used as monomer, and by adjusting the content of DFK, a series of thermoplastic resin, poly(bisphthalazinone ether ketone) (PBPESKs) were synthesized by high temperature solution polycondensation. Through the characterization of hydrogen nuclear magnetic resonance spectroscopy, FT-IR and elemental analysis, the results show that the structure of the synthesized polymers is consistent with the design. The glass transition temperature of the PBPESKs is in the rang of 298~324 ℃, and the 5% thermal mass loss temperature is in the rang of 512~517 ℃. PBPESKs resins have the good solubility in polar organic solvents such as NMP, DMAc, CHCl3, etc. By solution casting, the resultant polymer films exhibit the tensile strength, elastic modulus and elongation at breaking of 74~87 MPa, 1.85~1.92 GPa and 12.6%~13.9%, respectively.

    参考文献
    相似文献
    引证文献
引用本文

张胜男, 刘 程, 蹇锡高.含双二氮杂萘酮结构聚芳醚酮热塑性树脂的合成与性能[J].高分子材料科学与工程,2021,37(11):6-12. Shengnan Zhang, Cheng Liu, Xigao Jian. Synthesis and Properties of Poly(bisphthalazinone ether ketone) Thermoplastic Resin[J]. Polymer Materials Science & Engineering,2021,37(11):6-12.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-03-02
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司