水性氟化丙烯酸酯-环氧酯复合涂层的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省科技统筹创新工程重点实验室项目(2013SZS10-Z01)


Preparation and Properties of Waterborne Fluorinated Acrylate Epoxy Ester Composite Coatings
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以亚麻油酸和环氧树脂为原料、丙二醇甲醚醋酸酯为溶剂制备环氧酯;以过氧化苯甲酰、过氧化苯甲酸叔丁酯为引发剂,引发丙烯酸类单体与含氟丙烯酸类单体发生自由基聚合制备氟化丙烯酸酯;将环氧酯和氟化丙烯酸酯进行复合,得到具有极高疏水性能的水性涂层。通过红外光谱、热重分析、乳液粒径和稳定性测试等方法对乳液结构和性能进行分析,通过原子力显微镜、扫描电镜、接触角和电化学测试等方法对涂层各项性能进行分析。结果表明,环氧酯与氟化丙烯酸酯质量比为1∶2、含氟单体量为6%时,乳液粒径为52.28 nm、分散性系数为0.130、涂层接触角为105.4°、硬度为3H,耐腐蚀性良好。

    Abstract:

    Epoxy esters were prepared by using linoleic acid and epoxy resin as raw material and propylene glycol methyl ether acetate as solvent. Using benzoyl peroxide and tert-butyl benzoate peroxide as initiator, acrylic monomers and fluorinated acrylic monomers were synthesized by free radical polymerization. Epoxy ester and fluorinated acrylate were compounded to obtain water-based coatings with high hydrophobicity. The structure and properties of the emulsions were analyzed by FT-IR, TGA, emulsion particle size and stability tests. The properties of the coatings were analyzed by AFM, SEM, contact angle and electrochemical tests. The results show that when the mass ratio of epoxy ester to fluorinated acrylic ester is 1∶2, the fluorinated monomer content is 6%, the particle size of emulsion is 52.28 nm, the dispersion coefficient is 0.130, the contact angle of coating is 105.4°, the hardness is 3H, and the corrosion resistance is good.

    参考文献
    相似文献
    引证文献
引用本文

李林涛, 李小瑞, 姜 娈, 陈绪永, 刘勇兵, 段业睿.水性氟化丙烯酸酯-环氧酯复合涂层的制备及性能[J].高分子材料科学与工程,2021,37(11):29-37. Lintao Li, Xiaorui Li, Luan Jiang, Xuyong Chen, Yongbing Liu, Yerui Duan. Preparation and Properties of Waterborne Fluorinated Acrylate Epoxy Ester Composite Coatings[J]. Polymer Materials Science & Engineering,2021,37(11):29-37.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-03-02
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司