Abstract:Ureido groups are usually produced by the reaction of isocyanate and amino groups. Because isocyanate is harmful to human health and environment, and the cost is high, more and more attention has been paid to the synthesis of ureido polymer adhesives by using low-cost urea instead of isocyanate. In this paper, a series of low-cost formaldehyde-free hyperbranched ureido polymer adhesives were synthesized from cheap methyl acrylate and p-phenylenediamine by Michael addition reaction and amidation reaction, and then fused with urea by A2+B4 polycondensation without catalyst and solvent. The NMR, FT-IR, MS and GPC were used to analyze and verify their structure; DSC and TGA were used to analyze their thermal behavior and thermal stability. Finally, the ureido polymer was used as adhesive to bond different substrates. The results show that the bonding strength of bonding wood is more than 1.34 MPa, much higher than requirements of Type II Plywoods in China National Standard (GB/T 17657-2013), and it has good water resistance; used for bonding polymethyl methacrylate, tempered glass, polytetrafluoroethylene, rubber, agate and other substrates, it also shows a strong adhesion.