非等温DSC法研究TSPZ-EP环氧树脂的固化动力学
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金-石油化工联合基金重点项目(U1663226)


Curing Kinetics of TSPZ-EP Epoxy Resin Characterized by Non-Isothermal DSC
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用一锅两步法合成了一种含硅和二氮杂萘酮结构的环氧树脂(TSPZ-EP),并通过非等温差示扫描量热分析(DSC)研究了树脂在不同升温速率下的固化行为。采用n级模型和自催化(m, n)模型确定了固化反应动力学方程;选用商用双酚A环氧树脂(DGEBA)与其进行共混改性,通过外推法确定固化工艺,测试其力学性能。结果表明,n级反应模型与实验值相差较大,自催化(m, n)模型计算得到的曲线能够很好地与实验值吻合;固化工艺为100 ℃ 2 h+130 ℃ 2 h+160 ℃ 2 h+180 ℃ 2 h,并通过红外光谱测试证实了环氧固化物均已固化完全;冲击性能表明,添加TSPZ-EP后改善了环氧固化物的韧性。

    Abstract:

    A epoxy resin TSPZ-EP containing silicon and nitrogen heterocyclic structure was synthesized by a one-pot two-step method, and the curing kinetics of the resin system at different heating rates was investigated by the non-isothermal DSC. The curing reaction kinetics equation was determined by n order reaction and autocatalytic (m, n) model; commercial bisphenol A epoxy resin (DGEBA) was selected for blending, the curing process was optimized by extrapolation method, and then the mechanical properties were tested. The results show that the n order reaction model is quite different from the experimental value, while the curing behavior of the system follows the autocatalytic (m, n) model; the curing process is 100 ℃ 2 h+130 ℃ 2 h+160 ℃ 2 h+180 ℃ 2 h, and the IR spectra confirm that the cured epoxy resins were cured completely; the impact test indicates that the cured epoxy resins adding TSPZ-EP have better toughness.

    参考文献
    相似文献
    引证文献
引用本文

张雨晴, 张锋锋, 王锦艳, 蹇锡高.非等温DSC法研究TSPZ-EP环氧树脂的固化动力学[J].高分子材料科学与工程,2021,37(11):77-85. Yuqing Zhang, Fengfeng Zhang, Jinyan Wang, Xigao Jian. Curing Kinetics of TSPZ-EP Epoxy Resin Characterized by Non-Isothermal DSC[J]. Polymer Materials Science & Engineering,2021,37(11):77-85.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-03-02
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司