Abstract:The ethyl α-cyanoacrylate (ECA) was in-situ polymerized into poly(ethyl α-cyanoacrylate) (PECA) successfully on the surface of the millimeter-scale calcium alginate liquid core capsules (CaSA-caps), which was triggered by water in CaSA-caps dispersed in silicone oil. The effects of ECA amount on the structure, morphology, controlled release property and thermal stability of CaSA-caps coated with PECA (PECA@CaSA-caps) were investigated. The results show that white PECA coating was formed on the surface of CaSA-caps. With the increase of ECA amount, the diameter of PECA@CaSA-caps and the thickness of coating both increase; while the mass loss ratio of PECA@CaSA-caps decreases. The barrier property and thermal stability of the capsule wall of PECA@CaSA-caps are enhanced. Compared with CaSA-caps, the mass loss ratio of PECA@CaSA-caps is decreased by 57.89% in 24 h when the ECA amount is 2 mL/g, and the PECA coating can effectively prevent the diffusion of water. In general, the preparation process is green, non-toxic and rapid under mild reaction conditions. Industrialized production of PECA@CaSA-caps can be achieved, indicating that the large-size hydrogel capsules can be modified with uniform coating, which has important values in the field of biological medicine.