氟硅烷改性聚丁二烯型聚氨酯水声透声橡胶的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Preparation and Properties of Underwater Acoustically Transparent Polybutadiene-Based Polyurethane Modified by Fluorosilicone
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以端羟基聚丁二烯(HTPB)、甲苯二异氰酸酯(TDI)、羟基氟硅油(FSO)和2,4-二氨基-3,5-二甲硫基甲苯(E-300)为原料,采用两步法设计合成了一系列氟硅烷改性聚丁二烯型聚氨酯水声透声材料(FSPU)。运用傅里叶变换红外光谱、扫描电子显微镜、热失重分析、水接触角测试、吸水率测试、动态力学热分析、力学性能测试和透声性能测试等对改性聚氨酯的结构和性能进行了表征,探究了氟硅烷的含量对聚氨酯性能的影响。结果表明,FSPU的特性声阻抗与海水十分匹配。随着FSO含量增加,FSPU的水接触角逐渐升高,吸水率逐渐降低。当羟基氟硅油质量分数为50%时,FSPU-50的水接触角和吸水率分别为103.3°和0.4%,比纯聚氨酯分别提高了37.5%和降低了66.7%。同时,聚丁二烯型聚氨酯与氟硅烷的相容性较好,FSPUs的玻璃化转变温度在-47 ℃左右,具有良好的耐低温性能,可以满足水下工作的各项性能要求。

    Abstract:

    A series of fluorosilicone-modified polybutadiene polyurethanes (FSPU) were successfully synthesized with hydroxyl-terminated polybutadiene (HTPB), toluene diisocyanate (TDI), hydroxyl fluorosilicone oil (FSO) and 2,4-diamino-3,5-dimethylthiotoluene (E-300) by two-step method. The structures of obtained materials were confirmed by Fourier transform-infrared (FT-IR). The water resistance and acoustic properties of FSPUs were tested by water contact angle measurement, water absorption test, dynamic mechanical analysis (DMA) and sound field measurement. Meanwhile, the mechanical properties and thermal stability were studied by universal material testing machine and thermal gravity analysis (TGA). It is found that the characteristic acoustic impedance of FSPUs matches with seawater better with increasing FSO. The insertion loss of FSPU-50 at 550 kHz is only 123.5 dB/m, which is 15.6% lower than that of pure polyurethane(PU). It is also observed that the water contact angle of FSPUs gradually increases and the water absorption rate gradually decreases with the increase of FSO content. When the mass fraction of FSO is 50%, the water contact angle of FSPU-50 is 103.3° and the water absorption is 0.4%, which are increased by 37.5% and decreased by 66.7%, respectively, compared with PU. Moreover, the results of SEM and DMA show that polybutadiene-based polyurethane performs good compatibility with FSO. In addition, the glass transition temperature (Tg) of FSPUs is decreased to around -47 ℃. The low Tg contributes to low-temperature resistance, which helps FSPU meet the requirements of underwater working environment. In conclusion, these results demonstrate that FSPU is an ideal acoustically transparent material and holds great potential in fields of underwater sonar systems, submarine acoustic windows and submarine oil exploration.

    参考文献
    相似文献
    引证文献
引用本文

李芝华, 张译丹, 沈玉婷, 顾晓红, 高 远, 李珺杰, 陆小祥.氟硅烷改性聚丁二烯型聚氨酯水声透声橡胶的制备与性能[J].高分子材料科学与工程,2021,37(12):9-16. Zhihua Li, Yidan Zhang, Yuting Shen, Xiaohong Gu, Yuan Gao, Junjie Li, Xiaoxiang Lu. Preparation and Properties of Underwater Acoustically Transparent Polybutadiene-Based Polyurethane Modified by Fluorosilicone[J]. Polymer Materials Science & Engineering,2021,37(12):9-16.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-04-02
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司