金属螯合剂接枝聚乙烯醇泡沫材料的制备与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

舰船螺旋桨及影响区原位智能修复材料与方法机理研究(6140004040101)


Preparation and Properties of Polyvinyl Alcohol Foams Grafted with Metal Chelating Agent
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用金属螯合剂(EDTAD)接枝聚乙烯醇(PVA),通过熔融挤出化学发泡法制备了聚乙烯醇基EDTA二酐聚合物(PVA-g-EDTAD)泡沫材料,研究了EDTAD含量对泡沫材料结构与性能的影响。结果表明,最终接枝改性成型的 PVA-g-EDTAD泡沫材料具有致密均匀的泡孔结构,泡孔平均孔径为 14.2 nm、表观密度为 0.20 kg/m3,泡沫材料吸水率可达本身质量的4倍;泡沫材料拉伸力学性能良好,拉伸强度达2.69 MPa,断裂伸长率达79.9%,弹性模量达5.1 MPa;重金属铜离子吸附量达75 mg/g。接枝EDTAD质量分数为15%时,制备的PVA-g-EDTAD泡沫材料各项性能最佳。

    Abstract:

    Polyvinyl alcohol-based foam materials (PVA-g-EDTAD)were synthesized viamelting extrusion chemical foaming method,and the structure and properties of the foam materials with different EDTAD contents were investigated. The results show that the PVA-g-EDTAD foam has dense and uniform morphologies with an average pore diameter of 14.2 nm, an apparent density of 0.20 kg/m3,and 4 times of the water absorption ratios than its own mass.The foam also has excellent tensile properties,the tensile strength,elongation at break and elastic modulus are 2.69 MPa, 79.9% and 5.1 MPa, respectively. The best adsorption capacity of heavy metal copper ion is obtained when the mass fraction of EDTAD is 15%.

    参考文献
    相似文献
    引证文献
引用本文

武 强, 王源升.金属螯合剂接枝聚乙烯醇泡沫材料的制备与性能[J].高分子材料科学与工程,2021,37(12):39-44. Qiang Wu, Yuansheng Wang. Preparation and Properties of Polyvinyl Alcohol Foams Grafted with Metal Chelating Agent[J]. Polymer Materials Science & Engineering,2021,37(12):39-44.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-04-02
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司