石墨烯/聚甲醛复合材料的摩擦学性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Tribological Properties of Polyformaldehyde Composites Modified by Graphene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以市售聚甲醛为原料,采用注塑法制备石墨烯/聚甲醛复合材料,并进行了摩擦学性能研究。差示扫描量热分析结果表明,石墨烯的加入会导致材料熔点降低;光学显微镜图片显示,石墨烯有助于细化晶粒。加入石墨烯后,复合材料的弯曲强度有所提升,冲击强度、拉伸强度出现一定程度的下降,略低于原材料,但耐磨性有显著的提升。石墨烯的加入明显降低了复合材料的摩擦系数及磨损量,且当石墨烯质量分数为0.3%时,复合材料表现出最优的减摩耐磨性,摩擦系数和磨损量分别降低了53.6%和72.5%。

    Abstract:

    Using commercially available polyformaldehyde(POM) as raw material, POM-based composites with graphene were prepared by injection and the tribological properties were studied. The results of differential scanning calorimetry (DSC) indicate that the addition of graphene will decrease the melting point of the composites and refine the grains; the bending strength of the material is improved, though the impact strength and tensile strength of the composite are slightly lower than those of the raw material. Graphene has a significant improvement on the wear-resisting properties of the composites. The friction coefficient (COF) and wear volume of the composites are remarkably reduced, when the graphene mass fraction is 0.3%, the COF and wear volume are optimal, which are reduced by 53.6% and 72.5%, respectively.

    参考文献
    相似文献
    引证文献
引用本文

张晓阳, 杜鸿达, 陈 威, 康飞宇.石墨烯/聚甲醛复合材料的摩擦学性能[J].高分子材料科学与工程,2021,37(12):61-66. Xiaoyang Zhang, Hongda Du, Wei Chen, Feiyu Kang. Tribological Properties of Polyformaldehyde Composites Modified by Graphene[J]. Polymer Materials Science & Engineering,2021,37(12):61-66.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-04-02
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司