激光处理对3D打印聚醚酰亚胺, 聚醚醚酮和聚醚醚酮/碳纤维制件胶接性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

大连市科技局重点研发基金(2018J11CY007);国家自然科学基金资助项目(U1837205);东华大学纤维材料改性国家重点实验室开放课题(KF2002);国家重点研发计划项目(2020YFB031160)


Effect of Laser Treatment on Shear Bond Strength of 3D-Printed Polyetherimide, Polyether Ether Ketone and Polyether Ether Ketone/Carbon Fiber
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用激光技术对3D打印机制备的聚醚酰亚胺(PEI)、聚醚醚酮(PEEK)和聚醚醚酮/碳纤维(PEEK/CF)制件表面进行处理,研究了激光处理对3种制件的表面结构、粗糙度、润湿性及胶接强度的影响;探究了激光处理对制件胶接强度增强机理。结果表明,经激光处理的制件表面形成沟槽结构,表面粗糙度增加,制件表面由亲水变为疏水。以胶膜为胶黏剂时,PEEK和PEEK/CF制件的胶接强度分别从2.5 MPa和3.28 MPa增加到3.71 MPa和5.06 MPa; 以液体胶为胶黏剂时,PEEK和PEEK/CF制件的胶接强度分别从2.36 MPa和2.41 MPa增加到6.79 MPa和5.06 MPa,提升幅度可达188%和154%。而激光处理对PEI制件的胶接强度无显著影响;激光处理的制件胶接强度的增强是制件胶接面间形成机械咬合作用和含氧官能团与胶黏剂间形成化学交联共同作用的结果。

    Abstract:

    Laser treatment method was applied to modify the surface of 3D-printed polyetherimide (PEI), polyether ether ketone (PEEK) and polyether ether ketone/carbon fiber (PEEK/CF) specimens. The effect of laser treatment on the surface structure, roughness, wettability and bonding strength of three sample surfaces was studied, and the bonding enhancement mechanisms of laser treatment were discussed. The results show that grooves are formed on the surface of samples, which increases the roughness and hydrophobicity of the sample surface after laser treatment. The shear bond strength of PEEK and PEEK/CF specimens is increased from 2.5 MPa and 3.28 MPa to 3.71 MPa and 5.06 MPa by applying adhesive film, respectively. When the liquid glue is used as adhesive, the shear bond strength of PEEK and PEEK/CF specimens is improved from 2.36 MPa and 2.41 MPa to 6.79 MPa and 5.06 MPa, with an increase 188% and 154%, respectively. However, the laser treatment has no significant impact on the adhesion strength of PEI parts. The bonding strength enhancement mechanism of laser-treated parts is mainly due to the mechanical interlocking effect and chemical cross-linking interaction between the sample oxygen-containing functional groups and adhesive.

    参考文献
    相似文献
    引证文献
引用本文

李卫杰, 张 伟, 李元成, 桑 琳, 秦凤鸣, 李 楠, 王锦艳, 蹇锡高.激光处理对3D打印聚醚酰亚胺, 聚醚醚酮和聚醚醚酮/碳纤维制件胶接性能的影响[J].高分子材料科学与工程,2021,37(12):75-82. Weijie Li, Wei Zhang, Yuancheng Li, Lin Sang, Fengming Qin, Nan Li, Jinyan Wang, Xigao Jian. Effect of Laser Treatment on Shear Bond Strength of 3D-Printed Polyetherimide, Polyether Ether Ketone and Polyether Ether Ketone/Carbon Fiber[J]. Polymer Materials Science & Engineering,2021,37(12):75-82.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-04-02
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司