低分子量级分对熔体拉伸聚乳酸流延膜结构和性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52173033, 51603047);广东省自然科学基金资助项目(2021A1515011914);广州市科技计划(2021020952)


Effect of the Content of Low Molecular Weight Component on the Structure and Properties of Melt-Stretched Polylactic Acid Casting Film
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    选取低分子量级分有较大差异的2种左旋聚乳酸(PLLA),比较了采用熔体拉伸工艺制备的聚乳酸流延膜的结构与性能的差异。实验结果显示,较少低分子量级分的存在有利于熔体拉伸场下聚乳酸分子链的解缠结,在低熔体拉伸比下更易形成类取向纤维结构,带来聚乳酸流延膜常温韧性和结晶性能的改善;解缠结后,在高熔体拉伸比下,形成的类Shish-kebab结构明显,带来流延膜高的断裂应力。通过对原料中低分子量级分及熔体拉伸流动场的调控可以实现聚乳酸流延膜的高强高韧。

    Abstract:

    Two kinds of poly (L-lactic acid) (PLLA) with large difference in low molecular weight component content were selected. The structure and properties of polylactic acid (PLA) films prepared by melt-stretching process were compared. The low content of low molecular weight component is beneficial for the disentanglement of PLA molecular chains in the melt-stretching flow field and formation of oriented fiber-like structure under low melt-drawing ratio, which is conducive to improving the crystalline ability and toughness of PLA under room temperature. Under high melt-drawing ratio, the formed shish-like structure is more apparent, resulting in the higher stress at break. Through the control of low molecular weight component content in PLA and melt-stetching flow field, the high strength and high toughness of PLA would be obtained.

    参考文献
    相似文献
    引证文献
引用本文

梁烨琳, 田子钦, 黄恒辉, 谢嘉宜, 徐睿杰, 雷彩红.低分子量级分对熔体拉伸聚乳酸流延膜结构和性能的影响[J].高分子材料科学与工程,2021,37(12):98-102. Yelin Liang, Ziqin Tian, Henghui Huang, Jiayi Xie, Ruijie Xu, Caihong Lei. Effect of the Content of Low Molecular Weight Component on the Structure and Properties of Melt-Stretched Polylactic Acid Casting Film[J]. Polymer Materials Science & Engineering,2021,37(12):98-102.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-04-02
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司