Abstract:Composite materials with high dielectric properties and flexibility are more and more used in the field of tactile sensors. The dielectric properties and flexibility of composite materials are very important to improve the sensitivity and achieve flexible functions of tactile sensors. At present, the main method to improve the dielectric properties of composites is to fill a small amount of conductive rigid particles into the matrix of polydimethylsiloxane (PDMS). However, this method reduces the flexibility of composites, causes the mechanical properties of composites to decrease and limits the application of tactile sensors. In this paper, PDMS/EGaIn composites were prepared by filling micro-droplets of liquid metal eutectic indium gallium (EGaIn) oxidized by 6-acrylamidohexanoic acid(6-AHA) into the PDMS matrix, analyzing the micro-morphology of EGaIn droplets in PDMS/EGaIn composites, studying the mechanical and dielectric properties of PDMS/EGaIn composites, and simulating and analyzing the properties of PDMS/EGaIn composites applied in tactile sensors. The results show that the dielectric properties of PDMS/EGaIn composites can be effectively improved by filling the PDMS matrix with micro-droplets of liquid metal EGaIn. Compared with pure PDMS, the mechanical properties of PDMS/EGaIn composites are not significantly reduced, and the high flexibility is achieved. In a certain range, the increase of EGaIn content in PDMS/EGaIn composite materials can improve the response ability of sensor output capacitance, while the increase of relative thickness of PDMS/EGaIn composite materials will not cause the continuous increase of sensor output capacitance response ability, which is a reasonable value between 0.4 and 0.6.