Abstract:A method for preparing patterned calcium alginate hydrogel scaffold based on bipolar electrochemistry was proposed. By photolithography technology, a multi shape electrode on indium tin oxide (ITO) glass was fabricated, which leads to the specific-area deposition of calcium alginate. Meanwhile, a height growth model was established, and the effects of three parameters, such as reaction time, DC power supply voltage and driving electrode spacing, on the height of the prepared hydrogel were studied. The results show that the error between the predicted height of the hydrogel model and the measured value is less than 5%. When the reaction time is 100 s, the DC power supply voltage is 12.5 V, and the driving electrode spacing is 30 mm, the hydrogel density is uniform. Finally, the cells were embedded in hydrogel for 20 h, and the cell viability is maintained at over 80%. It is proved that the hydrogel scaffold prepared by this method has little damage to cells, and has great reference value for the construction of biological scaffold in vitro for tissue engineering.