本体透明MABS树脂相区结构控制及对性能的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51903017);吉林省科技发展计划项目(20190302128GX)


Effect of Control of the Micro-Structure on Properties of Transparent MABS Resin
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用本体聚合技术合成甲基丙烯酸甲酯-丙烯腈-丁二烯-苯乙烯(MABS)共聚物,通过改变连续相树脂的生成速率、相对分子质量和稀释剂种类,研究不同状态连续相中橡胶链形成的粒子结构形态对性能的影响。动力学曲线和透射电镜(TEM)分析表明,连续相树脂生成速率的提高导致橡胶粒子呈现出边缘不规整形态,反之形成双连续相结构;分子量分布曲线和动态力学分析表明,连续相相对分子质量降低会减缓橡胶链蜷曲成橡胶粒子的进程,容易获得多内包容结构大尺寸橡胶粒子,得到的MABS树脂透光率最高可至90.6 %,冲击强度164 J/m;激光粒度仪和TEM测试结果表明,稀释剂对二甲苯与乙苯的复配使用可以获得橡胶粒子尺寸呈现双峰分布的相区结构,在对二甲苯与乙苯体积比为1∶3时,MABS树脂透光率为89.1 %,冲击强度高达230 J/m。通过上述研究提出橡胶链在连续相中的析出过程决定相区结构这一观点,为本体ABS树脂的结构控制提供了一种简单明了的思路,以便制备光学力学性能平衡的MABS树脂。

    Abstract:

    Transparent methacrylate-acrylonitrile-butadiene-styrene (MABS) resin was prepared through bulk polymerization. The effect of particle structure formed by the rubber chains in different continuous phases on performance was studied by changing the generation rate of the continuous phase resin, molecular weight and type of diluent. Kinetics curves and TEM analysis show that the increase of continuous phase resin polymerization rate leads to the appearance of irregular edges in the rubber particles, and vice versa the formation of a dual continuous phase structure; the molecular weight distribution and DMA curves show that the decrease in the molecular weight of resin phase will slow down the process of rubber chains curling into rubber particles, resulting in the rubber particles being easy to obtain large-sized rubber particles with multiple internal containment structures. The transmittance of the obtained MABS resin reaches 90.6 %, and the impact strength is 164 J/m. The results of DLS and TEM show that the compound use of dimethylbenzene and ethylbenzene can obtain a phase zone structure with the bimodal distribution of rubber particle size. When the ratio of dimethylbenzene to ethylbenzene is 1:3, the transmittance of MABS is 89.1 %, and the impact strength is as high as 230 J/m. Through the above research, the viewpoint that the precipitation process of rubber chains in the continuous phase determines the micro-structure is proposed, which provides a simple and clear idea for the structure control of the bulk-polymerized ABS resin, so as to prepare a transparent MABS with balanced optical and mechanical properties.

    参考文献
    相似文献
    引证文献
引用本文

徐 璐, 陈仁辉,丁晓艳, 谢景伟, 刘伯军, 张明耀.本体透明MABS树脂相区结构控制及对性能的影响[J].高分子材料科学与工程,2022,38(1):175-181. Lu Xu, Renhui Chen, Xiaoyan Ding, Jingwei Xie, Baijun Liu, Mingyao Zhang. Effect of Control of the Micro-Structure on Properties of Transparent MABS Resin[J]. Polymer Materials Science & Engineering,2022,38(1):175-181.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-05-09
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司