丁基橡胶/还原氧化石墨烯复合材料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金国际合作项目(51861135201)


Preparation and Properties of Butyl Rubber/Reduced Graphene Oxide Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用水合肼(HH)为还原剂制备还原氧化石墨烯(rGO),以rGO作为增强填料,丁基胶乳为基体,通过改进的超声胶乳混合和原位还原工艺,制备了力学性能优异的丁基橡胶(IIR)/rGO复合材料。结果表明,在IIR基体中添加较低含量rGO时,rGO显示完全剥离和均匀分散的状态;rGO由于具有较高的比表面积,可以提高其与IIR基体之间的界面相互作用,使得IIR/rGO复合材料的拉伸强度和断裂伸长率共同增大;对比纯IIR,IIR/rGO复合材料的储能模量增加、损耗因子减小,具有更好的阻尼性能和热稳定性。

    Abstract:

    Reduced graphene oxide (rGO) was prepared by using hydrazine hydrate (HH) as reducing agent. Using rGO as reinforcement filler and butyl latex as matrix, butyl rubber (IIR)/rGO composites with excellent mechanical properties were prepared by improved ultrasonic emulsion mixing and in-situ reduction process. The results show that when a lower content of rGO is added to the IIR matrix, the rGO shows a state of complete stripping and uniform dispersion. Due to the high specific surface area of rGO, the interface interaction between rGO and IIR matrix can be improved, which makes the tensile strength and elongation at break of IIR/rGO composites increase together. Compared with pure IIR, the energy storage modulus of IIR/ RGO composites increases, the loss factor decreases, and the composites show better damping performance and thermal stability.

    参考文献
    相似文献
    引证文献
引用本文

马珍万, 卢锡立, 王占华, 费国霞, 夏和生.丁基橡胶/还原氧化石墨烯复合材料的制备及性能[J].高分子材料科学与工程,2022,38(2):73-79. Zhenwan Ma, Xili Lu, Zhanhua Wang, Guoxia Fei, Hesheng Xia. Preparation and Properties of Butyl Rubber/Reduced Graphene Oxide Composites[J]. Polymer Materials Science & Engineering,2022,38(2):73-79.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-05-26
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司