聚乙烯醇/相变微胶囊多孔定形复合相变材料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省科技厅重点研发计划(2022GY-365);中国纺织工业联合会科技指导性项目(2020039);西安市碑林区科技计划(GX2002)


Preparation and Properties of Polyvinyl Alcohol / Phase Change Microcapsules Porous Shape-Stabilized Composite Phase Change Materials
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    实验中将相变微胶囊乳液与聚乙烯醇(PVA)溶液复合,通过物理发泡法制得具有形状记忆性能的多孔定形复合相变材料,研究了相变微胶囊对多孔定形复合相变材料孔结构及吸水保水性、相变性能、形状记忆性能等的影响。结果表明,所制备多孔定形复合相变材料的孔结构随着微胶囊乳液用量的增大出现并泡现象,孔径与开孔率增大;吸水率与保水率明显提高,吸水率最大可达1025%;相变焓值随相变微胶囊乳液用量的增大而增大,可达10.85 J/g,具有良好的相变储热性能;多孔定形复合相变材料经弯折形变固定后,热致形变回复率5 min内可达77.8%,湿致形状回复率在1 min内可达到83.3%,具有较好的形状记忆特性。

    Abstract:

    Porous shape-stabilized composite phase change materials can effectively reduce the leakage of phase change materials, improve thermal conductivity and thermal stability, which have nowadays become the research focus of phase change materials. In this paper, phase change microcapsule emulsions were compounded with the polyvinyl alcohol (PVA) solution to produce porous shape-stabilized composite phase change materials with shape-memory by physical foaming method, and the effects of phase change microcapsules on the pore structure, water absorption and water retention, phase change properties and shape memory properties of porous shape-stabilized composite phase change materials were studied. The results show that with the increase of microcapsule emulsion, the pore structure of the prepared material shows the phenomenon of parallel bubbling, and the pore size and open pore rate increase; the water absorption and water retention rate increase significantly, and the maximum water absorption rate reaches 1025%; the enthalpy of phase change increases with the increase of phase change microcapsule emulsion, and reaches 10.85 J/g, which has good phase change heat storage performance. After the porous shape-stabilized composite phase change material is fixed by bending and deformation, the thermogenic deformation recovery rate can reach 77.8% in 5 min, and the wet shape recovery rate can reach 83.3% in 1 min, showing good shape memory properties.

    参考文献
    相似文献
    引证文献
引用本文

张曼妍, 师文钊, 刘瑾姝, 陆少锋, 崔杉杉, 周红娟, 苏国鑫.聚乙烯醇/相变微胶囊多孔定形复合相变材料的制备及性能[J].高分子材料科学与工程,2022,38(2):123-130. Manyan Zhang, Wenzhao Shi, Jinshu Liu, Shaofeng Lu, Shanshan Cui, Hongjuan Zhou, Guoxin Su. Preparation and Properties of Polyvinyl Alcohol / Phase Change Microcapsules Porous Shape-Stabilized Composite Phase Change Materials[J]. Polymer Materials Science & Engineering,2022,38(2):123-130.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-05-26
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司