基于单体反应物自聚合方法的高韧性聚酰亚胺树脂结构与性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家科技重大专项(2017-VII-0011-0106)


Properties of High Toughness Polyimide Resin by Polymerization of Monomers Reactants Method
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用单体反应物自聚合(PMR)方法,以4-苯乙炔苯酐为反应性封端剂,2,3,3',4'-联苯四甲酸二酐(α-BPDA)和4,4'-二氨基二苯醚(4,4'-ODA)为二酐和二胺单体,合成了不同相对分子质量的热固性聚酰亚胺树脂。借助差示扫描量热分析、动态力学热分析、热重分析和流变性能分析等方法,研究了相对分子质量与固化反应特性、流变特性、耐热性能、韧性性能的关系及影响机理。结果表明,随着相对分子质量增加,熔体最低黏度由10.4 Pa·s增加至1449.4 Pa·s;玻璃化转变温度由378 ℃下降至346 ℃,冲击强度由31.69 kJ/m2提高到62.15 kJ/m2。通过优化相对分子质量可实现对韧性性能、耐热性能与工艺性能的综合调控。

    Abstract:

    Thermoset polyimides with multiple molecular weight were synthesized by PMR using 4-phenylacetylene phthalic anhydride as reactive end sealing agent, 2,3,3',4'-diphthalic anhydride (α-BPDA) and 4,4'-diaminodiphenyl ether (4,4'-ODA) as dihydride and diamine monomers. DSC, DMA, TGA and rheology were used to study the relationship between molecular weight and curing reaction characteristics, rheological properties, heat resistance, toughness and its influence mechanism. The results indicate that with the increase of molecular weight, the minimum viscosity of the melt is increased from 10.4 Pa·s to 1449.4 Pa·s, the glass transition temperature is decreased from 369 ℃ to 346 ℃, and the impact strength is increased from 31.69 kJ/m2 to 62.15 kJ/m2. By optimizing the molecular weight, the comprehensive control of toughness, heat resistance and process performance can be achieved.

    参考文献
    相似文献
    引证文献
引用本文

李圣雄, 张 朋, 包建文, 姚逸伦, 钟翔屿, 杨 涛, 董波涛.基于单体反应物自聚合方法的高韧性聚酰亚胺树脂结构与性能[J].高分子材料科学与工程,2022,38(3):10-17. Shengxiong Li, Peng Zhang, Jianwen Bao, Yilun Yao, Xiangyu Zhong, Tao Yang, Botao Dong. Properties of High Toughness Polyimide Resin by Polymerization of Monomers Reactants Method[J]. Polymer Materials Science & Engineering,2022,38(3):10-17.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-06-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司