光敏聚氨酯丙烯酸酯固化收缩应力的影响因素
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Influence Factors on the Curing Shrinkage Stress of Photocurable Polyurethane Acrylates
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    光敏聚氨酯丙烯酸酯体系的光固化速度快,然而快速的聚合动力学会导致树脂在光聚合过程中内应力释放受到阻碍,出现严重的聚合收缩现象,使体系双键转化率降低,光固化材料性能较差。为了了解性能与聚合过程之间的关系,文中采用中红外光谱仪和光流变仪相结合的技术来监测光敏聚氨酯丙烯酸酯(PUA)的光聚合过程。结果发现,引发剂含量增加可以提高固化速率,降低聚合过程中的法向应力;UV光强降低会减少收缩应力,但同时也会降低体系的双键转化率。当单体官能度增加,凝胶点推迟出现,收缩应力降低。随着稀释剂单体中乙氧基柔性链增加,固化材料的柔韧性增大,从而收缩应力降低。

    Abstract:

    Photocurable polyurethane acrylates (PUA) have the advantages of fast curing and have found wide applications. However, rapid polymerization kinetics will hinder the release of internal stress of resin in the process of photopolymerization and result in serious polymerization shrinkage, reducing the conversion rate of double bonds and poor performance of photocuring materials. To explore the relationship between performance and polymerization process, the photopolymerization process of photosensitive PUA was monitored by the combination of FT-MIR and photorheometer in real time. The results show that the increase of initiator content could improve the curing rate and reduce the normal stress in the polymerization process. The increase of UV light intensity can reduce the shrinkage stress and improve the conversion rate of double bonds, but the saturation occurs when the light intensity reaches a certain value. When the monomer functionality is increased, the gel point is delayed and shrinkage stress is decreased. With the increase of ethoxy flexible chain in diluent monomer, the flexibility of cured materials increases, thus reducing the shrinkage stress.

    参考文献
    相似文献
    引证文献
引用本文

童梦玥, 孙冠卿, 刘 仁.光敏聚氨酯丙烯酸酯固化收缩应力的影响因素[J].高分子材料科学与工程,2022,38(3):96-105. Mengyue Tong, Guanqing Sun, Ren Liu. Influence Factors on the Curing Shrinkage Stress of Photocurable Polyurethane Acrylates[J]. Polymer Materials Science & Engineering,2022,38(3):96-105.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-06-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司