微尺度下H形分布流道充模流动不平衡特性
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51475395)


Numerical Simulation of Imbalance Characteristics of Filling Flow in H-Shaped Distribution Channel at Micro Scale
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为探究微尺度下的充填不平衡与传统注塑的不同,考虑微尺度下的影响充填不平衡的关键因素包括尺度效应、壁面滑移和对流换热,采用聚甲醛(POM),对H形对称分布的半圆形截面微流道系统进行了充模流动数值模拟实验。通过分析浇口处对称点间温差数据,实验结果表明壁面滑移能有效降低对称点间温度差,对充填不平衡有较明显的改善作用。对流换热使流道内熔体的一部分热量通过模具散失,加剧了充填不平衡,且对流换热系数越小,充填不平衡越明显。随着流道尺寸的减小,壁面滑移越明显,对流换热使对称点间温差变小,有利于改善充填不平衡。

    Abstract:

    In order to explore the difference between the filling imbalance in micro-scale and traditional injection molding, the key factors affecting the filling imbalance in micro-scale include scale effect, wall slip and convective heat transfer. The numerical simulation experiment of filling flow in H-shaped semi-circular cross section microchannel system with symmetrical distribution was carried out by using polyoxymethylene (POM). By analyzing the temperature difference between the symmetrical points at the gate, the experimental results show that the wall slip can effectively reduce the temperature difference between the symmetrical points and improve the imbalance of filling. Convective heat transfer makes part of the heat of the melt in the flow passage dissipate through the mold, aggravating the imbalance of filling, and the smaller the convective heat transfer coefficient, the more obvious the imbalance of filling. With the decrease of the flow channel size, the wall slip becomes more obvious, and the convective heat transfer reduces the temperature difference between the symmetrical points, which is beneficial to improve the filling imbalance.

    参考文献
    相似文献
    引证文献
引用本文

徐 斌, 杨 波, 安晓玉, 杨朝龙.微尺度下H形分布流道充模流动不平衡特性[J].高分子材料科学与工程,2022,38(3):113-121. Bin Xu, Bo Yang, Xiaoyu An, Chaolong Yang. Numerical Simulation of Imbalance Characteristics of Filling Flow in H-Shaped Distribution Channel at Micro Scale[J]. Polymer Materials Science & Engineering,2022,38(3):113-121.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-06-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司