基于二硫键的三重刺激响应可控润湿性表面的构建
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52073018)


Construction of a Triple-Stimulus-Responsive Surface with Controllable Wettability Based on Disulfide Bond
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    合成了一种双-[3-(三甲氧基硅)丙基]-二硫化物(TPDS),并将其接枝到具有优异光热转化能力的聚多巴胺改性表面(PDA-Glass),获得了二硫键功能化表面(2S-PDA-Glass)。利用X射线光电子能谱仪对该表面进行了表征,采用水接触角测定仪表征了2S-PDA-Glass在980 nm近红外光、365 nm紫外光及50 ℃温度刺激下可控润湿性。结果表明,接枝于表面上的二硫键在3种刺激源下均可发生断裂,被还原成亲水的巯基,导致表面水接触角由78°下降到55°左右;而表面巯基被三氯化铁氧化后又重新形成二硫键,表面水接触角可再次升至78°左右,实现了多重刺激响应的可控润湿性。使得材料可以在不同的环境中自由选择刺激源,应用范围更为广泛。

    Abstract:

    The bis-[3-(trimethoxysi-lyl)propyl]-disulfide (TPDS) was synthesized and grafted to the polydopamine (PDA)-modified surface (PDA-Glass) with excellent photothermal conversion capability to obtain a disulfide bond functionalized surface (2S-PDA-Glass). The surface was characterized by X-ray photoelectron spectroscopy (XPS). The controllable wettability of 2S-PDA-Glass under 980 nm near-infrared light, 365 nm ultraviolet light, and temperature stimulation at 50 ℃, respectively, was characterized by water contact angle analyzer. The results show that disulfide bonds on the surface can be broken under three stimulation sources and reduced to hydrophilic sulfhydryl groups, which results in a decline of water contact angle of the surface from 78o to about 55o, while sulfhydryl groups on the surface were oxidized by ferric chloride to form disulfide bonds again, meanwhile, the water contact angle of the surface is raised to about 78o again, thereby achieving controllable wettability based on mutiple-stimulus response. This also allows the material to freely select the stimulus sources in different environments, thereby broadening?applications of the materials.

    参考文献
    相似文献
    引证文献
引用本文

王文豪, 刘 伟, 孙 芳.基于二硫键的三重刺激响应可控润湿性表面的构建[J].高分子材料科学与工程,2022,38(3):122-128. Wenhao Wang, Wei Liu, Fang Sun. Construction of a Triple-Stimulus-Responsive Surface with Controllable Wettability Based on Disulfide Bond[J]. Polymer Materials Science & Engineering,2022,38(3):122-128.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-06-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司