Abstract:The liquid carboxyl- terminated fluororubber (LCTF) was prepared using 246 type solid fluororubber as reaction raw material and peroxide (H2O2)/KOH as oxidative degradation system by microwave assisted one- step oxidation degradation method. The structure, molecular weight and its distribution, carboxyl content of LCTF were characterized by FT-IR, 1H-NMR, 19F-NMR, GPC and chemical analysis method. The results prove that 246 solid fluororubber was efficiently oxidized and degraded into LCTF, the controlled degradation of molecular weight (Mn) and carboxyl content of LCTF was achieved. The effects of microwave power and heating time, type and amount of solvent, KOH concentration, H2O2/KOH mole ratio, amount of H2O2 and KOH solution, type and amount of phase transfer catalyst (PTC) on molecular weight and carboxyl content of LCTF were systematically studied. Results show that with the change of affecting factors, the content of Mn and carboxyl group show the same change rule. When the microwave power is 480 W, microwave heating time is 11 min, volume of THF or acetone is 175 mL or 150 mL, KOH solution concentration is 45%, mole ratio of H2O2/KOH is 1.50/1.00, mass of H2O2 solution and KOH solution is 35.32 g and 48.18 g respctively, and amount of PTC (BTEAC) is 0.0165 mol, the content of Mn and carboxyl is the lowest and content of carboxyl is the highest. Microwave assisted heating can greatly accelerate the process of oxidative degradation and shorten the reaction time.