低负载锆基 MOF 增强聚双环戊二烯纳米复合材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Low-Loading Zirconium-Based MOF Reinforced Polydicyclopentadiene Nanocomposites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中以纳米多孔锆基 MOFs(Zr-MOFs)材料(UIO-66 和 UIO-66-NH2)为填料用于增强聚双环戊二烯的力学性能, 采用原位聚合法制备了 Zr-MOFs/PDCPD 纳米复合材料。通过红外分析和场发射扫描电镜表征了 Zr-MOFs 颗粒对 Zr-MOFs/PDCPD 复合材料的界面和其在聚双环戊二烯中分散的影响。通过拉伸实验、无缺口冲击试验、弯曲实验等 方法研究了 Zr-MOFs/PDCPD 复合材料的力学性能,确定了最佳的 Zr-MOFs 负载量。结果表明,当 UIO-66-NH2 质量分数为 0.6%时,复合材料的拉伸强度、弯曲强度、冲击强度相比于纯的 PDCPD 分别提升了 29%,30.8%,25.1%,改性后 的复合材料热变形温度提升了 31.3%。

    Abstract:

    Nanoporous zirconium-based MOFs materials (UIO-66, UIO-66-NH2) were introduced as filler to enhance the mechanical properties of polydicyclopentadiene(PDCPD) nanocomposites. MOFs/PDCPD were prepared by in- situ polymerization. Through infrared analysis and field emission scanning electron microscopy (FE- SEM), the effects of UIO particle function on the MOFs/PDCPD interface and the dispersion quality of nanoparticles in polydicyclopentadiene were studied. The mechanical properties of Zr-MOFs/PDCPD composites were studied by tensile test, unnotched impact test, bending test and other methods, and the optimal Zr- MOFs loading capacity was determined. The results show that when the UIO-66-NH2 mass fraction is 0.6%, the tensile strength, flexural strength, and impact strength of the composite material are increased by 29%, 30.8%, and 25.1% respectively compared with those of pure PDCPD. In addition, the heat distortion temperature of the modified composite is increased by 31.3%.

    参考文献
    相似文献
    引证文献
引用本文

吴飞扬,陈 琦,陈 宬,Francis Verpoort.低负载锆基 MOF 增强聚双环戊二烯纳米复合材料[J].高分子材料科学与工程,2022,38(4):50-57. Feiyang Wu, Qi Chen, Cheng Chen, Francis Verpoort. Low-Loading Zirconium-Based MOF Reinforced Polydicyclopentadiene Nanocomposites[J]. Polymer Materials Science & Engineering,2022,38(4):50-57.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-07-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司