SiO2微球主导下多孔树脂微观结构的精细调控
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

内蒙古自然科学基金资助项目(2020BS02003)


Control of Microstructure of Porous Resin Involved by SiO2
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以环氧树脂为反应单体、聚乙二醇为不良溶剂、1,4-二氧六环为良溶剂、4,4’-二氨基二环己基甲烷为交联剂,利用反应诱导相分离法制备环氧树脂多孔材料。 在制备过程中引入 SiO2 微球 ,通 过改变 SiO2 微球的质量 分数和润湿性,调控环氧树脂多孔材料的微观结构。在不引入新组分的情况下,通过酸刻蚀法去除 SiO2 微球, 实现了对环氧树脂多孔材料微观结构的精细调控。利用光学显微镜、扫描电镜和压汞仪探讨了纳米 SiO2 微球 加入前后环氧树脂共混体系的相分离过程及环氧树脂多孔材料的微观结构变化。结果表明,SiO2微球的加入 减小了相分离后期相结构的粗化速率;随着 SiO2 微球质量分数的增加,环氧树脂多孔材料的孔径逐渐减小,结构细化 ;值得注意的是 ,对于SiO2微球润湿性的影响 ,当 SiO2 微球优先被其中一相润湿时,其对环氧树脂多孔 材料微观结构的影响更显著。

    Abstract:

    SiO2 was added in the preparation process of the epoxy resin porous materials by the reaction induced phase separation method, the microstructure of the epoxy resin porous materials can be regulated by changing the mass fraction and wetting properties of SiO2. Without the participation of new components, SiO2 was removed by acid etching, and control of the microstructure of the epoxy resin porous materials was realized. This method has certain universality. Comparing the phase separation process of the epoxy resin blend systems before and after the addition of nano-SiO2 microspheres, the results show that the addition of SiO2 reduces the coarsening rate of the phase structure in the later stage of phase separation; with the increase of the mass fraction of SiO2 microspheres, the pore size of the epoxy resin porous materials gradually decreases; it is worth noting that the influence law of the wettability of SiO2 microspheres, when the SiO2 microspheres are preferentially wetted by one of the phases, its effect on the microstructure of epoxy porous materials is more significant.

    参考文献
    相似文献
    引证文献
引用本文

赵锦梅, 刘 飒, 范琼予, 王星越, 米亚策. SiO2微球主导下多孔树脂微观结构的精细调控[J].高分子材料科学与工程,2022,38(4):58-65. Jinmei Zhao, Sa Liu, Qiongyu Fan, Xingyue Wang, Yace Mi. Control of Microstructure of Porous Resin Involved by SiO2[J]. Polymer Materials Science & Engineering,2022,38(4):58-65.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-07-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司