融法构建超疏水纤维素/壳聚糖气凝胶及其吸油性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金青年基金资助项目(51803004);安徽农业大学研究生创新基金项目(2021yjs-49, XJDC2021489)


Construction of Cellulose/Chitosan Super-Hydrophobic Aerogel by Freeze-Thaw Method and Its Oil Absorption Performance
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以微晶纤维素、壳聚糖为双网络单元,以氢氧化钠/尿素/水为溶剂体系、甲基三甲氧基硅烷(MTMS)为改性剂,采用“冻融-浸渍”两步法制得超疏水纤维素/壳聚糖复合气凝胶。研究结果表明,该复合气凝胶呈现三维互穿多孔结构,其接触角随着MTMS的加入,先逐渐增大后急剧减小,当MTMS的浓度为1.96 g/μL时,疏水效果最好,接触角可达到151°。此外,该气凝胶具有良好的油/水选择性吸收能力,吸油量最高达到9.3 g/g,且经过5次再生循环后,对于异丙醇的吸附量仍能保持初始值的92.8%,是一种良性可再生的生物质基吸油材料。

    Abstract:

    Herein, a kind of super- hydrophobic cellulose/chitosan hybrid aerogel was prepared via “freeze- thaw- impregnation” two- step method, in which cellulose and chitosan worked as double network units with sodium hydroxide/urea/water as solvent system and methyl trimethoxysilane (MTMS) acted as modifier. A series of characterizations show that the hybrid aerogel presents a three- dimensional interpenetrating porous structure, and the contact angle gradually raises first and then decreases sharply with the incorporation of MTMS. When the concentration of MTMS is 1.96 g/μL, the hydrophobic effect reaches the optimal with the contact angle of 151°. In addition, the aerogel displays good oil/water selective absorption performance with the maxmium oil absorption capacity of 9.3 g/g. After the 5th regeneration, the adsorption capacity for isopropyl alcohol can still maintain 92.8% of its initial value, indicating a benign and renewable biomass-based oil absorption material.

    参考文献
    相似文献
    引证文献
引用本文

李瑞雪,冯馨心,李婷婷,马 政,杨安廷,焦晨璐,王 健.融法构建超疏水纤维素/壳聚糖气凝胶及其吸油性能[J].高分子材料科学与工程,2022,38(4):119-125. Ruixue Li, Xinxin Feng, Tingting Li, Zheng Ma, Anting Yang, Chenlu Jiao, Jian Wang. Construction of Cellulose/Chitosan Super-Hydrophobic Aerogel by Freeze-Thaw Method and Its Oil Absorption Performance[J]. Polymer Materials Science & Engineering,2022,38(4):119-125.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-07-23
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司