可注塑成型天然橡胶组合物的硫化机理
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Vulcanization Mechanism of Natural Rubber Compositions for Injection Molding
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过差示扫描量热分析(DSC)、旋转流变仪测试、原位红外和二维光谱分析探究了可注塑成型天然橡胶(NR)复合物的硫化机理。DCS分析表明,NR橡胶复合物的最大放热峰出现在168 ℃附近,对应着最大交联反应速率。结合原位红外光谱测试探究了NR橡胶复合物外扰温度的升高(30~230 ℃),并研究了NR的交联反应过程。由原位红外光谱可知,随着温度升高,NR橡胶复合物中甲基和亚甲基的吸收峰逐渐减弱,同时硫化交联反应不断消耗NR橡胶复合物中的—C=C—键。移动窗口二维相关红外(MW2D)光谱分析表明,天然橡胶中—C=C—的转变发生在70 ℃和110 ℃,最大交联温度为177 ℃。研究结果对天然橡胶的硫化机理探讨具有一定的借鉴意义。

    Abstract:

    The cross-linking reaction process of injection-molded natural rubber (NR) composites was analyzed through DSC, rotational rheometer, infrared spectroscopy and moving-window two-dimensional correlation spectroscopy (MW2D). The DCS results show that the maximum exothermic peak of the NR rubber compound appears at around 168 ℃ corresponding to the maximum crosslinking reaction rate. Furthermore, combined with in-situ infrared spectroscopy, the increase of external disturbance temperature (30~230 ℃) of the NR rubber compound was investigated and the cross-linking reaction process of NR was studied. According to in-situ infrared spectroscopy, as the temperature increases, the absorption peaks of methyl and methylene groups in the NR rubber compound gradually weaken, and the vulcanization and crosslinking reaction continue to consume —C=C— in the NR rubber compound. Moving window two-dimensional correlation infrared (MW2D) spectroscopy analysis indicate that the —C=C—transition in NR occurs at 70 ℃ and 110 ℃, and the maximum crosslinking temperature is 177 ℃. This thesis has a certain degree of research reference meaning on the vulcanization mechanism of NR.

    参考文献
    相似文献
    引证文献
引用本文

徐 雨, 张集海.可注塑成型天然橡胶组合物的硫化机理[J].高分子材料科学与工程,2022,38(5):58-61. Yu Xu, Jihai Zhang. Vulcanization Mechanism of Natural Rubber Compositions for Injection Molding[J]. Polymer Materials Science & Engineering,2022,38(5):58-61.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-08-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司