阳离子固化环氧固晶胶在LED小芯片封装中的应用
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江西省吉安市双百计划


Application of Cationic Polymerization of Epoxy Resins in LED Packaged with Small Size Chips
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用差示扫描量热法(DSC)对环氧树脂ERL-4221阳离子聚合固晶胶的反应动力学进行研究,并利用Kissinger模型对非等温数据进行分析。在阳离子固化剂质量分数为1.0%的条件下,该环氧固化体系的表观活化能为81.76 kJ/mol,表明该反应体系在常温下反应速度较慢,具有明显的潜伏特性。利用T-β外推法及等温固化过程确定了体系固化烘烤工艺为105 ℃ (30 min)+170 ℃(30 min)。同时,采用芯片剪切力测试及分层试验证实了工艺参数的有效性。研究结果可为该固晶胶固化工艺及应用提供理论支撑。

    Abstract:

    The reaction kinetics of cationic polymerization of epoxy resins (ERl-4221) was investigated by differential scanning calorimetry (DSC). The model-fitting Kissinger was applied to the analysis of non-isothermal data, and the apparent activation energy with the cationic curing agent mass fraction of 1.0% is 81.76 kJ/mol. The results show that the cationic polymerization of epoxy resins is a deferred reaction at room temperature with obvious latent features. The curing parameters was obtained by adopting “T-β” extrapolation, and the die shear test and C-SAM test prove the validity of the curing parameters designed in this paper. These results constitute a theoretical basis for the curing and application of the die attach adhesive.

    参考文献
    相似文献
    引证文献
引用本文

陈江聪, 李秉轩, 李衡峰, 张淑娟.阳离子固化环氧固晶胶在LED小芯片封装中的应用[J].高分子材料科学与工程,2022,38(5):62-68. Jiangcong Chen, Bingxuan Li, Hengfeng Li, Shujuan Zhang. Application of Cationic Polymerization of Epoxy Resins in LED Packaged with Small Size Chips[J]. Polymer Materials Science & Engineering,2022,38(5):62-68.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-08-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司