亚麻油微胶囊的制备及环氧涂层的自修复性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52005095);黑龙江省自然科学基金资助项目(LH2019E014)


Preparation of Linseed Oil-Loaded Microcapsules and Self-Healing Properties of Epoxy Coatings
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以亚麻油(LO)为芯材、聚氨酯(PU)为壁材通过界面聚合法,在水包油(O/W)乳液体系中制备了包覆率高、热化学稳定的LO@PU微胶囊,讨论了乳化剂种类及浓度、搅拌速度、芯壁比等对微胶囊成囊性能的影响。所制备的微胶囊分散效果好、形貌规则、成球性好,粒径为(60±21) μm;微胶囊具有较好的热稳定性,热分解温度为235~480 ℃;微胶囊芯材LO的质量分数为55.6%。同时,制备了含微胶囊的自修复环氧涂层,盐水浸泡实验和电化学阻抗实验表明,含有10%微胶囊的环氧树脂涂层的自修复及防腐蚀性能最好,划痕涂层浸泡30 d后的阻抗模量仍为1.0×104 Ω·cm2。

    Abstract:

    Using linseed oil (LO) as core material and polyurethane (PU) as wall material, LO@PU microcapsules with high coating rate, thermal stability and chemical stability were prepared in oil/water emulsion system by interfacial polymerization. The effects of emulsifier type and concentration, stirring speed and core-wall ratio on the encapsulation performance were discussed. The prepared microcapsules have good dispersion, regular morphology, and the particle size is (60±21) μm. The prepared microcapsules show the good thermal stability, thermal decomposition temperature is 235~480 ℃. The mass fraction of LO was 55.6%. At the same time, the self-healing epoxy coating containing microcapsules was prepared, salt water immersion test and electrochemical impedance test show that the self-healing and anti-corrosion performance of the epoxy coating containing 10% microcapsule is the best, and the impedance modulus of the scratch coating is still 1.0×104 Ω·cm2 after immersing for 30 d.

    参考文献
    相似文献
    引证文献
引用本文

金佳赢, 张茗珺, 张琲瑶, 李 鑫, 李海燕.亚麻油微胶囊的制备及环氧涂层的自修复性能[J].高分子材料科学与工程,2022,38(5):121-128. Jiaying Jin, Mingjun Zhang, Beiyao Zhang, Xin Li, Haiyan Li. Preparation of Linseed Oil-Loaded Microcapsules and Self-Healing Properties of Epoxy Coatings[J]. Polymer Materials Science & Engineering,2022,38(5):121-128.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-08-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司