磷钼酸铵金属盐协同膨胀型阻燃剂阻燃聚甲醛
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(51703051);河南省高等学校重点科研项目(21A430005)


Synergistic Effect of Ammonium Phosphomolybdate Metal Salt and Intumescent Flame Retardant for Flame Retardant Polyformaldehyde
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用不同金属盐对磷钼酸铵(AMP)进行改性,将其作为协效剂与膨胀型阻燃剂(IFR)复配用于阻燃聚甲醛(POM),对阻燃POM复合材料的阻燃性能和力学性能进行了评价,并通过锥形量热分析、热失重分析及扫描电子显微镜等对相关阻燃作用机理进行了探究。结果表明,磷钼酸铵金属盐(PMos)协同IFR 阻燃聚甲醛复合材料具有优异的阻燃性能。当添加2%的PMos 与28%的IFR 协效阻燃POM时,不仅垂直燃烧等级(UL94)(3.2 mm)达到V-0 等级,而且UL94(1.6 mm)也能达到V-1 等级,极限氧指数(LOI)都在58%以上,尤其是镁锰双离子改性AMP协效阻燃POM的LOI达到了62.1%,相对于未添加协效剂的阻燃POM 复合材料,其热释放速率和总烟释放量分别下降了28.8%和35.8%,并且复合材料的力学性能也有所提升。

    Abstract:

    Ammonium phosphomolybdate (AMP) was modified by metal salts, which was compounded with the intumescent flame retardant(IFR) for flame retardant polyoxymethylene (POM).The flame retardant properties and mechanical performance of the POM composites were evaluated, and the flame retardant mechanism was analyzed by cone calorimetry analysis, thermo-gravimetric analysis , scanning electron microscope (SEM),etc.The results show that ammonium phosphomolybdate metal salt (PMos) combined with IFR has excellent flame retardant performance in POM. With 2% PMos and 28% IFR synergistically added in POM, not only the vertical combustion grade(UL94) (3.2 mm) can reach V-0 grade, but also the UL94 (1.6 mm) can reach V-1 grade, and the limit oxygen index(LOI) can reach up to above 58%. Among them, the LOI of AMP modified by magnesium and manganese ion reaches 62.1%. Compared with the flame retardant POM composite without synergist, the heat release rate and total smoke release are decreased by 28.8% and 35.8%, respectively, and the mechanical properties of the composite are also improved.

    参考文献
    相似文献
    引证文献
引用本文

鲁世科,杨正,王振华,房晓敏,刘保英,李建通.磷钼酸铵金属盐协同膨胀型阻燃剂阻燃聚甲醛[J].高分子材料科学与工程,2022,38(12):47-55.

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-08-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@163.net; gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2024 版权所有
技术支持:北京勤云科技发展有限公司