Abstract:High-temperature-solution polymerization of 4-(4-hydroxyphenyl)-2,3-diazanaphthalene-1-one (DHPZ), 2,2- bis(4- hydroxyphenyl) propane (BPA) and 4,4'- dichlorodiphenyl sulfone (DCS) were carried out by two- step method with sulfolane as solvent. A series of copoly(aryl ether sulfone) containing different phthalazinone content (PPAESs) with high molecular weight were synthesized by controlling the ratio of monomers. The characterization of 1H- NMR, FT- IR and wide- angle X- ray diffraction (WXAD) analysis show that the structures of the synthesized polymers are consistent with the designed ones. Compared with one- step polymerization method, the copolymers prepared by two- step exhibit higher number- average molecular weight up to more than 5 × 104 measured by gel permeation chromatography (GPC). Through DSC and TGA thermal analysis, the glass transition temperatures (Tg) of PPAESs range from 197 ℃ to 257 ℃ , and the 5% mass loss temperatures ranges from 486 ℃ to 495 ℃ . Furthermore, PPAESs are soluble in some polar aprotic solvents, such as chloroform, N,N-dimethylacetamide (DMAc) and N- methylpyrrolidone (NMP). The tensile strength, tensile modulus and the elongation at break of PPAESs membrane are in the range of 55~77 MPa, 1.71~1.94 GPa and 4%~7%, respectively.