超支化聚酰胺修饰碳纳米管/环氧树脂复合材料的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52178440)


Preparation and Properties of Hyperbranched Polyamide Modified Carbon Nanotubes / Epoxy Resin Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中制备了不同支化度的超支化聚酰胺接枝碳纳米管,并对碳纳米管接枝前后的微观结构进行了表征。红外光谱和热重分析结果表明,超支化聚酰胺成功接枝到了碳纳米管表面;透射电子显微镜分析结果表明,3 种支化度的超支化聚酰胺均在碳纳米管表面形成了聚合物包裹层,管径明显增加,且支化度越高,管径增加越多。进一步地,将上述所制备的超支化聚酰胺修饰碳纳米管加入环氧树脂体系,制备了不同改性环氧树脂复合材料,动态力学热分析和力学性能分析结果表明,超支化聚酰胺修饰碳纳米管/环氧树脂复合材料的储能模量、玻璃化转变温度和力学损耗峰高度均比未经修饰的碳纳米管/环氧树脂复合材料有所降低,冲击韧性明显提高,证明了超支化聚酰胺大量的分子支链对环氧树脂的增韧贡献,且支化度越高,增韧效果越明显;光学显微镜及扫描电子显微镜分析结果显示,超支化聚酰胺的加入明显改善了碳纳米管在环氧树脂中的分散性;从增韧机制来看,该体系的增韧机理属于碳纳米管拔出机制,碳纳米管的拔出物基本都是短凸棱拔出,碳纳米管大多被拉断,表明超支化聚酰胺修饰碳纳米管与环氧树脂形成了非常牢固的连接,对环氧树脂具有优异的增韧效果。

    Abstract:

    Hyperbranched polyamide grafted modified carbon nanotubes with different branching degrees were prepared, and the microstructure of carbon nanotubes before and after grafting was characterized. The results of FT-IR and TGA show that hyperbranched polyamide was successfully grafted onto the surface of carbon nanotubes; TEM analysis show that the hyperbranched polyamides with three degrees of branching form polymer coating on the surface of carbon nanotubes, and the pipe diameter increases significantly, and the higher the degree of branching is, the more the pipe diameter increases. Furthermore, the hyperbranched polyamide modified carbon nanotubes prepared above were added to the epoxy resin system to prepare different modified epoxy resin composites. The results of DMA and mechanical properties analysis show that the storage modulus, glass transition temperature Tg and height of mechanical loss peak are lower than those of unmodified carbon nanotube / epoxy resin composite, and the impact toughness is significantly improved. It is proved that a large number of molecular branches of hyperbranched polyamide contribute to the toughening of epoxy resin, and the higher the degree of branching is, the more obvious the toughening effect is; SEM analysis show that the addition of hyperbranched polyamide significantly improves the dispersion of carbon nanotubes in epoxy resin; the toughening mechanism of the system belongs to the carbon nanotube pull-out mechanism. The pullout objects of carbon nanotubes are basically pulled out by short convex edges, and most carbon nanotubes are pulled off, indicating that hyperbranched polyamide modified carbon nanotubes form a very firm connection with epoxy resin, which has excellent toughening effect on epoxy resin.

    参考文献
    相似文献
    引证文献
引用本文

李璐,张贤明,盛兴跃,刘攀,全弘彬,李凯.超支化聚酰胺修饰碳纳米管/环氧树脂复合材料的制备及性能[J].高分子材料科学与工程,2022,38(10):81-89. Lu Li, Xianming Zhang, Xingyue Sheng, Pan Liu, Hongbin Quan, Kai Li. Preparation and Properties of Hyperbranched Polyamide Modified Carbon Nanotubes / Epoxy Resin Composites[J]. Polymer Materials Science & Engineering,2022,38(10):81-89.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-12-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司