玻璃纤维增强环氧大豆油丙烯酸酯树脂基复合材料含浸压力固化过程的数值模拟
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

四川省科技厅研发项目(2018GZYZF0066);民航教育人才项目(0252101)


Numerical Simulation of Impregnated Compression Curing Process of Glass Fiber Reinforced Epoxy Soybean Oil Acrylic Resin Matrix Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    针对玻璃纤维增强环氧大豆油丙烯酸酯树脂基复合材料含浸压力固化工艺过程,考虑材料的时变特性与黏弹性,建立了三维固化过程模型。通过与实验结果的比较,证明建立的复合材料含浸压力固化模型可以有效地描述不同升温速率下材料的固化过程。在此基础上,重点研究了固化过程中材料参数变化及Maxwell 单元的过渡对于各向应力应变的影响。结果表明,玻璃纤维能有效地提高材料的剪切强度,较低的固化升温速率能有效减少材料固化过程中内应力与固化收缩应变的产生。

    Abstract:

    According to the pressured curing process of glass fiber reinforced epoxy soybean oil acrylic resin(AESO) matrix composites, considering the time- dependent properties and viscoelasticity of the materials, a threedimensional curing process model was established. By comparing with the experimental results, it is proved that the pressured curing model of composites can effectively predict the curing process of the materials at different heating rates. On the basis, the effects of the changes of material parameters and transition of Maxwell units on the stress and strain during curing were studied. The results show that the glass fiber can effectively improve the shear strength of the materials, and the low curing heating rate can effectively reduce the internal stress and curing shrinkage strain during curing process.

    参考文献
    相似文献
    引证文献
引用本文

赵烽,李梦,赵欣.玻璃纤维增强环氧大豆油丙烯酸酯树脂基复合材料含浸压力固化过程的数值模拟[J].高分子材料科学与工程,2022,38(10):110-116. Feng Zhao, Meng Li, Xin Zhao. Numerical Simulation of Impregnated Compression Curing Process of Glass Fiber Reinforced Epoxy Soybean Oil Acrylic Resin Matrix Composites[J]. Polymer Materials Science & Engineering,2022,38(10):110-116.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2022-12-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司