苯并噁嗪型邻苯二甲腈的制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费专项资金(50321042017001)


Preparation and Properties of Benzoxazine-Based Phthalonitrile
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以4-氨基苯氧邻苯二甲腈(BZN)、多聚甲醛和双酚A/联苯二酚/苯酚为原料制备了苯并噁嗪型邻苯二甲腈,分别命名为BZPh-A,BZPh-B和BZPh-C。采用差示扫描量热法、傅里叶变换红外光谱法和热重分析法分析了BZPh的固化行为和固化物耐热性,结果表明,BZPh为双重固化机理,分别是噁嗪环的开环聚合和氰基的自催化交联固化,BZPh-C的固化温度分别为219.4 ℃和264.4 ℃,其固化物在N2和空气中热失重5%的温度(Td5)及800 ℃质量保留率分别为467.2 ℃,74.7%和464.6 ℃,21.4%,耐热性优于BZPh-A和BZPh-B。石英纤维增强BZPh 树脂复合材料(QF/BZPh)的弯曲强度均高于600 MPa、层间剪切强度均高于35 MPa。400 ℃热老化2 h 后,复合材料力学强度保留率大于80%;400 ℃热老化2 h 后,质量损失低于4%;QF/BZPh-C的玻璃化转变温度(Tg)为477 ℃,复合材料具有良好的力学性能和耐热性能。

    Abstract:

    Benzoxazine-type phthalonitrile (BZN), named BZPh-A, BZPh-B and BZPh-C, were prepared from 4-aminophenoxyphthalonitrile (BZN), paraformaldehyde and bisphenol A/biphenol/phenol. The curing behaviour of BZPh and heat resistance of the cured products were analyzed by differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA), and it is obtained that BZPh shows a dual curing mechanism, which is the ring-opening polymerization of oxazine ring and the autocatalytic cross-linking curing of cyanide, and the curing temperatures of BZPh- C are 219.4 ℃ and 264.4 ℃ , respectively. The curing temperatures of BZPh-C are 219.4 ℃ and 264.4 ℃, respectively, and the thermal mass loss of 5% (Td5) and mass retention at 800 ℃ are 467.2 ℃, 74.7% and 464.6 ℃, 21.4% for the cured products in N2 and air, respectively, which are better than those of BZPh- A and BZPh- B. The bending strength of the quartz fibre reinforced BZPh resin composites (QF/BZPh) is above 600 MPa and interlaminar shear strength is above 35 MPa. The mechanical strength retention rate of the composites is more than 80% after 2 h of thermal ageing at 400 ℃, and the mass loss is less than 3.8% after 2 h of thermal ageing at 400 ℃. The glass transition temperature (Tg) of QF/BZPh-C is 477 ℃. The composites have good mechanical and thermal properties.

    参考文献
    相似文献
    引证文献
引用本文

管 俊,白小陶,李泽宇.苯并噁嗪型邻苯二甲腈的制备及性能[J].高分子材料科学与工程,2023,39(1):43-49. Jun Guan, Xiaotao Bai, Zeyu Li. Preparation and Properties of Benzoxazine-Based Phthalonitrile[J]. Polymer Materials Science & Engineering,2023,39(1):43-49.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-03-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司