Abstract:Expanded graphite (EG) was got from expandable graphite by microwave irradiation, the binary system of EG/polyvinyl chloride(PVC), the ternary system of EG/PVC- chlorinated polyethylene (CPE) and EG/PVCthermoplastic polyurethane elastomer(TPU) compounded powder were prepared by solid state shear milling (S3M) based on pan mill. Structure and properties of EG/PVC, EG/PVC-CPE and EG/PVC-TPU co- powder were characterized by SEM, TEM, XRD, analysis of particle size and distribution. The results show that S3M can realize the pulverizing, dispersion and compounding of EG-PVC or EG-PVC-CPE or EG-PVC-TPU, further more demonstrate that mixing CPE with EG-PVC and TPU with EG-PVC is benefit for the exfoliating graphite. The thickness of the graphite in EG/PVCTPU co- powder is equivalent to 1~5 layers. The goal of changing the expanded graphite to graphene was achieved; when the EG mass fraction is 3 %, the electrical conductivity of EG/CPE-PVC composites increases the eight orders of magnitude. When the EG mass fraction exceeds 4% , the conductivity surges again and a second percolation occurs. When the EG mass fraction exceeds 5% , the conductivity reaches 0.22 S/m, showing good thermal conductivity, antistatic and electromagnetic shielding performance. Graphene /PVC- TPU nanocomposites have similar conductivity changes to graphene- like/PVC- CPE composites, and better thermal conductivity, antistatic and electromagnetic shielding. S3M is an effective way to prepare graphene/polymers composites.