炭黑颗粒分布模型的建立及其优化的天然橡胶复合材料性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

广东省科技专项基金(大专项+任务清单)(2020s0011,mmkj2020061)


Establishment of Carbon Black Particle Distribution Model and Its Optimized Properties of Natural Rubber Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中首次引入炭黑颗粒分布细度模数(MX 炭黑)的概念,建立炭黑颗粒理想模型,得出炭黑颗粒的理想表面积系数(S),并结合实际生产及应用经验,计算出能够同时满足炭黑一级分散与二级分散的理论最佳颗粒分布。同时选取软质炭黑N550和硬质炭黑N234进行颗粒分布调整实验,研究其填充天然橡胶的分散性、物理力学性能及动态力学性能等。实验结果表明,调整成理论最佳颗粒分布的N550和N234相较于其他颗粒分布样品,具有更优的炭黑分散性,胶料的加工、分散、力学及耐磨等性能均得到一定程度上的提升。

    Abstract:

    In order to study the effect of particle size distribution of carbon black(CB)on natural rubber, for the first time, the fineness modulus MXCB of carbon black particle size distribution was introduced, established the ideal model of carbon black particle, calculated the ideal surface area coefficient S of carbon black particles, and combined with the practical production and application experience, the theoretical optimal particle size distribution of carbon black which can meet both the primary and secondary dispersion was calculated. At the same time, N550 (carbon black,soft) and N234 (carbon black,hard) were selected for the particle size distribution adjustment experiment to study the dispersity, physical mechanical and dynamic properties of natural rubber filled with them. The experimental results show that N550 and N234 with the optimal particle distribution have better carbon black dispersion than other samples, and the processing, mechanical and wear resistance properties of the rubber are improved to a certain extent.No matter soft or hard carbon black, the performance of carbon black with optimal particle distribution presents a positive trend, which proves that different particle sizes of carbon black have a dynamic balance in reinforcing dispersion performance of rubber compound. In the future, particle distribution design can be carried out according to different product requirements with further research, and the particle distribution can also be monitored by using equilibrium factor MXcarbon · S in carbon black production.

    参考文献
    相似文献
    引证文献
引用本文

余本祎, 林浩晋, 许体文, 黄锐意.炭黑颗粒分布模型的建立及其优化的天然橡胶复合材料性能[J].高分子材料科学与工程,2023,39(1):97-105. Benyi Yu, Haojin Lin, Tiwen Xu, Ruiyi Huang. Establishment of Carbon Black Particle Distribution Model and Its Optimized Properties of Natural Rubber Composites[J]. Polymer Materials Science & Engineering,2023,39(1):97-105.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-03-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司