丁苯橡胶对竹粉/高密度聚乙烯复合材料冲蚀磨损特性的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

安徽高校自然科学研究重点项目(KJ2020A0283),国家自然科学青年基金资助项目(51804007)


Effect of Styrene Butadiene Rubber on Erosive Wear Characteristics of Bamboo Fiber/High-Density Polyethylene Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为制备适用于海岸工程领域的高耐冲蚀型木塑复合材料,基于旋转射流技术研究了丁苯橡胶(SBR)对竹粉/高密度聚乙烯(HDPE)复合材料冲蚀磨损特性的影响。结果表明,引入SBR可以提升竹粉/HDPE复合材料的硬度和冲击强度(硬度最大增幅1.3%、冲击强度最大增幅18.8%),并优化竹粉/HDPE复合材料中纤维和基体的两相界面质量。较之未引入SBR的竹粉/HDPE复合材料,引入SBR的竹粉/HDPE复合材料的抗冲蚀性显著提升,其最大冲蚀率发生于冲蚀靶距1.0 cm和冲蚀时间180 s处。较之未冲蚀面,竹粉/HDPE复合材料冲蚀面主要表现出纤维破碎和基体脆性断裂,以及氧含量相对增加和羟基伸缩振动加强等磨损特征。引入SBR不改变旋转射流对竹粉/HDPE复合材料的冲蚀机理。

    Abstract:

    To prepare wood–plastic composites with high erosive wear resistance suitable for coastal engineering applications, the effects of styrene butadiene rubber (SBR) on the erosive wear characteristics of bamboo fiber/highdensity polyethylene (HDPE) composites were investigated through swirling water jet technique. The results show that the inclusion of SBR can improve the hardness and impact strength of bamboo fiber/HDPE composites (the maximum increase of 1.3% in hardness and 18.8% in impact strength). Moreover, the two- phase interfacial quality between the fibers and matrix components of these composites is optimized. The bamboo fiber/HDPE composites filled with SBR present significantly higher erosive wear resistance than that without SBR, with the maximum erosive wear rate achieved at a shooting distance of 1.0 cm and an erosion duration of 180 s. Compared with the un-erosive surfaces, the erosive surfaces of the bamboo fiber/HDPE composites mainly show the wear characteristics of fiber pulverization and matrix brittle fracture as well as a relative increase in the oxygen content and strengthening of hydroxyl stretching vibration. The inclusion of SBR does not change the erosive wear mechanism of swirling water jet on bamboo fiber/HDPE composites.

    参考文献
    相似文献
    引证文献
引用本文

姜良朋, 尹仟慧, 付菁菁, 李晓凯, 张西望, 杜 鹏.丁苯橡胶对竹粉/高密度聚乙烯复合材料冲蚀磨损特性的影响[J].高分子材料科学与工程,2023,39(1):119-126. Liangpeng Jiang, Qianhui Yin, Jingjing Fu, Xiaokai Li, Xiwang Zhang, Peng Du. Effect of Styrene Butadiene Rubber on Erosive Wear Characteristics of Bamboo Fiber/High-Density Polyethylene Composites[J]. Polymer Materials Science & Engineering,2023,39(1):119-126.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-03-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司