具有更佳尺寸稳定性的含噁唑基团的聚酰亚胺薄膜材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

浙江省公益技术应用研究项目(LGG22E030014);宁波市公益项目重点项目(202002N3123);宁波市重大科技攻关暨“揭榜挂帅”项目(2022Z004);宁波市自然科学基金资助项目(2019A610136)


Polyimides Containing Oxazole Groups with Better Dimensional Stabilities
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用 4,4'-二氨基二苯醚(4,4'-ODA)与 2-(4-氨基苯基)-5-氨基苯并噁唑(DAPBO)作为二胺单体,通过改变二者的摩尔比,与 3,3’,4,4’-联苯四甲酸二酐(s-BPDA)聚合,制备得到了一系列含有噁唑基团结构的聚酰亚胺薄膜。系统地对薄膜样品进行了红外光谱、差示扫描量热分析、热失重分析、动态力学热分析、热机械分析等表征。研究发现,随着二胺中 DAPBO 占比的增加,聚酰亚胺薄膜的热稳定性及玻璃化转变温度升高、热膨胀系数减小;当 ODA 与DAPBO 的摩尔比为 4:6 时,聚酰亚胺薄膜的热膨胀系数与铜最接近,有望应用于柔性印刷线路板领域。

    Abstract:

    To obtain polyimides films with better dimensional stability properties, different mole ratios of 4,4'-oxybisbenzenamine (4,4'-ODA) and 2- (3-amino-phenyl)-benzooxazol-5-ylamine (DAPBO) were used to polymerize with 3,3’,4,4’- biphenyl tetracarboxylic diandhydride (BPDA). The samples were systematically characterized, observed and measured by infrared spectrum characterization and thermal properties. Results show that the thermal stabilities and glass transition temperatures (Tg) increase with the increasing ratio of DAPBO because of the rigid structure of DAPBO. The coefficients of thermal expansion (CTE) are decreased with the increasing ratio of DAPBO. When the mole ratio of 4,4'-ODA and DAPBO is 4:6, the CTE is closed to 18×10- 6 K- 1, indicating that it is more appropriate to make flexible printed circuit boards with above-mentioned films.

    参考文献
    相似文献
    引证文献
引用本文

汪卓颖,何兆洋,丁兴成,高立江,刘仲明,李 兴,王 玮.具有更佳尺寸稳定性的含噁唑基团的聚酰亚胺薄膜材料[J].高分子材料科学与工程,2023,39(1):145-150. Zhuoying Wang, Zhaoyang He, Xingcheng Ding, Lijiang Gao, Zhongming Liu, Xing Li, Wei Wang. Polyimides Containing Oxazole Groups with Better Dimensional Stabilities[J]. Polymer Materials Science & Engineering,2023,39(1):145-150.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-03-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司