含硅氧烷超滑表面的制备及其性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

常州市科技支撑计划(工业) (CE 20200014);江苏省高等院校优先学术项目发展项目(PAPD)


Preparation and Properties of Siloxane-Containing Superslippery Surface
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    文中利用端氨基聚硅氧烷(APT-PDMS)和顺丁烯二酸酐酯化β-环糊精(β-CD-MAH)进行反应,再通过金属配位反应引入铁离子,制备了聚硅氧烷-顺丁烯二酸酐酯化β-环糊精(APT-PDMS-co-β-CD-MAH)。分别通过红外光谱、核磁共振、紫外分光光度计检验了聚合物的组成与结构。采用操作简单、低成本的呼吸图法创新性地制备了特殊多层次孔结构膜,通过静态接触角测试仪测试了多孔结构膜的疏水性能,通过场发射扫描电子显微镜观察了多孔结构膜的表面形貌。结果表明,当APT-PDMS 相对分子质量为3504、APT-PDMS 与β-CDMAH的摩尔比为3∶1、聚合物浓度为25 mg/mL 时制备的多孔基底及SLIPS 性能最佳,该多孔基材结构中的大孔包含2~3 个小孔,且小孔内还包含多个纳米级孔洞,静态接触角大于150°。灌入硅油后,滑动角小于10° ,且该超滑表面(SLIPS)具有良好的稳定性、自清洁性、防冰抗冻及抗细菌黏附性。

    Abstract:

    In recent decades, there has been growing interest in the development of functional, fluorine- free slippery liquid-infused porous surfaces(SLIPS), such SLIPS have great potential for many applications. In this paper, amino-terminated polysiloxane (APT-PDMS) and maleic anhydride esterified β-cyclodextrin (β -CD-MAH) were used for the reaction, the polysiloxane- maleic anhydride esterified β - cyclodextrin (APT- PDMS- co- β - CD- MAH) was prepared by introducing iron ions through metal coordination reaction. The composition and structure of the polymer were examined by infrared spectroscopy, nuclear magnetic resonance,and ultraviolet spectrophotometer, respectively. A special multi-layered porous structure membrane was innovatively prepared by a simple and low-cost respiration diagram method, the hydrophobic properties of porous structured membranes were tested by a static contact angle tester, and the surface morphologies of the porous structured membrane were observed by field emission scanning electron microscopy. The results show that the molecular weight of APT-PDMS is 3504, the mole ratio of APT-PDMS to β -CD-MAH is 3:1, and the porous substrate prepared with the polymer concentration of 25 mg/mL has the best performance as well as SLIPS, the macropores in the porous substrate structure contain 2~3 small pores, and the small pores also contain a plurality of nano- scale pores, and the static contact angle is >150° . After filling with silicone oil, the sliding angle is <10o, and the SLIPS has good stability, self- cleaning, anti- icing, anti- freezing, and anti-bacterial adhesion.

    参考文献
    相似文献
    引证文献
引用本文

杨 丽,吕程程,买重阳,胡 建,顾钦天,郭雅雯,赵烈伦, 王勃东,张志远,姜 彦,张洪文.含硅氧烷超滑表面的制备及其性能[J].高分子材料科学与工程,2023,39(2):154-161. Li Yang, Chengcheng Lü, Chongyang Mai, Jian Hu, Qintian Gu, Yawen Guo, Lielun Zhao, Bodong Wang, Zhiyuan Zhang, Yan Jiang, Hongwen Zhang. Preparation and Properties of Siloxane-Containing Superslippery Surface[J]. Polymer Materials Science & Engineering,2023,39(2):154-161.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-04-20
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司