无金属、卤素、硫等杂元素的聚甲基丙烯酸甲酯纳米微球的合成
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点研发计划(2016YFC0204901);国家自然科学基金资助项目(51803132);中央高校基本科研业务费专项资金(2022SCU12016);四川省重点研发计划(2022YFG0137)


Synthesis of Poly(methyl methacrylate) Nanospheres Without Metal, Halogen, Sulfur and Other Heteroelements
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    聚合物纳米微球可用于多孔催化剂的制备,但是来源于乳化剂、引发剂等的硫、卤素、碱金属等容易导致催化剂中毒。因此,文中以十二烷基二甲基氧化胺为乳化剂,过氧化氢/抗坏血酸氧化还原体系为引发剂,通过甲基丙烯酸甲酯乳液聚合,合成了仅含碳、氢、氧、氮4种元素的聚甲基丙烯酸甲酯纳米微球。研究了聚合工艺、引发剂用量与配比、乳化剂用量及单体浓度对单体转化率和微球粒径的影响。结果表明,搅拌速率、温度、引发剂配比及乳化剂用量对单体转化率的影响较大;微球粒径受聚合工艺、引发剂用量及配比的影响较小,微球粒径主要受乳化剂用量和单体浓度控制。

    Abstract:

    Polymer nano- microspheres can be used for the preparation of porous catalysts, but sulfur, halogens, alkali metals, etc. derived from emulsifiers, initiators, etc., can easily lead to catalyst poisoning. Therefore, in this paper, using dodecyl dimethyl amine oxide as emulsifier and hydrogen peroxide/ascorbic acid redox system as initiator, poly (methyl methacrylate) nano-microspheres containing only four elements of carbon, hydrogen, oxygen and nitrogen were synthesized by the emulsion polymerization of methyl methacrylate. The effects of the polymerization conditions, initiator dosage as well as ratio, emulsifier dosage and monomer concentration on the monomer conversion and size of the microspheres were studied. The results show that the stirring rate, temperature, initiator ratio and emulsifier dosage have a great influence on the monomer conversion. The size of the microspheres is less influenced by the polymerization conditions, the amount and ratio of initiator, but controlled by the amount of emulsifier and concentration of monomer.

    参考文献
    相似文献
    引证文献
引用本文

刘 志,刘 飞,淡 宜,黄 云,江 龙.无金属、卤素、硫等杂元素的聚甲基丙烯酸甲酯纳米微球的合成[J].高分子材料科学与工程,2023,39(3):1-7. Zhi Liu, Fei Liu, Yi Dan, Yun Huang, Long Jiang. Synthesis of Poly(methyl methacrylate) Nanospheres Without Metal, Halogen, Sulfur and Other Heteroelements[J]. Polymer Materials Science & Engineering,2023,39(3):1-7.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司