双单体接枝聚丙烯/聚烯烃弹性体增容聚丙烯/硅灰石/β成核剂复合材料
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

东北石油大学校引导基金(035/15071202006)


Polypropylene/Wollastonite/β-Nucleating Agent Composites Using Dual Monomers Grafted Polypropylene/Polyolefin Elastomer as Compatibilizer
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以丙烯酸-2-羟乙酯/马来酸酐接枝聚丙烯(PP)/聚烯烃弹性体共聚物(PPHM)为相容剂,通过熔融挤出制备了β成核聚丙烯/硅灰石复合材料。考察了PPHM含量对复合材料结构和性能的影响。红外光谱、扫描电镜和X射线衍射结果表明,PPHM与硅灰石表面形成了强相互作用,使复合体系的相容性得到提高,并对PP的结晶产生了明显影响。含50%(质量分数)PPHM的复合材料的缺口冲击强度达到(18.4±1.3)kJ/m2,约为纯PP的3倍,而拉伸强度仅降低了20.3%,实现了韧性和强度之间的相对平衡;此外,复合材料的熔体强度和热稳定性优于纯PP。

    Abstract:

    The β- nucleated polypropylene(PP)/wollastonite composites were prepared via melt- extrusion using polypropylene/polyolefin elastomer-g-2-hydroxyethyl acrylate/maleic anhydride (PPHM) as compatibilizer. The effects of PPHM content on the structure and properties of the composites were investigated. The infrared spectroscopy, scanning electron microscopy and X-ray diffraction results show that the PPHM forms a strong interaction at the surface of wollastonite, which improves the compatibility of the composite system and has a significant impact on the crystallization of PP. The notched impact strength of the composite with 50%PPHM reaches (18.4±1.3) kJ/m2, which is about 3 times that of pure PP, while the tensile strength is only reduced by 20.3 %, achieving a relative balance between toughness and strength. Furthermore, the melt strength and thermal stabilities of the composites are better than those of neat PP.

    参考文献
    相似文献
    引证文献
引用本文

祝宝东,赵 庚,刘金月,王 鉴.双单体接枝聚丙烯/聚烯烃弹性体增容聚丙烯/硅灰石/β成核剂复合材料[J].高分子材料科学与工程,2023,39(3):57-62. Baodong Zhu, Geng Zhao, Jinyue Liu, Jian Wang. Polypropylene/Wollastonite/β-Nucleating Agent Composites Using Dual Monomers Grafted Polypropylene/Polyolefin Elastomer as Compatibilizer[J]. Polymer Materials Science & Engineering,2023,39(3):57-62.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司