基于酯交换的生物基Vitrimer材料制备及性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

陕西省科技计划项目(2022SF-053)


Preparation and Properties of Bio-Based Vitrimer Materials Based on Transesterification
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以异甘露糖醇(IMT)、六亚甲基二异氰酸酯(HDI)、1,4-丁二醇(BDO)、丙三醇(GI)为原料,设计合成了生物基Vitrimer材料IMT-COO。通过傅里叶变换红外光谱和X射线衍射对其结构进行了表征;通过热重分析、差示扫描量热分析、应力-应变曲线、动态力学热分析(DMA)探究了IMT-COO材料热稳定性、玻璃转变温度、力学性能及储能模量。结果表明,IMT-COO具有良好热稳定性及力学强度,热分解温度达256 ℃,应力为1.24 MPa、应变为140 %。DMA结果表明,IMT-COO的储能模量最高达2671 MPa。IMT-COO的自愈合试验表明在自愈前后,各项性能无明显降低。

    Abstract:

    Using isomannitol (IMT), hexamethylene diisocyanate (HDI), 1,4- butanediol, and glycerol (GI) as raw materials, the bio- based Vitrimer material IMT- GI was designed and synthesized. Its structure was characterized by Fourier transform infrared spectroscopy (FT- IR) and X- ray diffraction (XRD). The thermal stability, glass transition temperature, mechanical properties and storage modulus of IMT- GI material were investigated by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), stress-strain curve and dynamic mechanical analysis (DMA). The results show that IMT-COO shows good thermal stability and high mechanical strength, the thermal decomposition temperature reaches 256 ℃, the stress is 1.24 MPa, and the strain is 140%. The storage modulus of IMT-COO measured by DMA is up to 2671 MPa. Through the self-healing test of IMT-COO, it is shown that there is no obvious decrease in various properties before and after self-healing.

    参考文献
    相似文献
    引证文献
引用本文

赵艳娜,张 婷,薛瑜瑜,侯雯彤,黄雨晴.基于酯交换的生物基Vitrimer材料制备及性能[J].高分子材料科学与工程,2023,39(3):134-139. Yanna Zhao, Ting Zhang, Yuyu Xue, Wentong Hou, Yuqing Huang. Preparation and Properties of Bio-Based Vitrimer Materials Based on Transesterification[J]. Polymer Materials Science & Engineering,2023,39(3):134-139.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司