吸热墨水喷射3D打印高分子材料的研究现状与发展趋势
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52275333);武汉市科技项目(2020010602012037);湖北省重点研发项目(2020BAB049)


Progress on Heat-Absorbing Ink Jetting 3D Printing of Polymers
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    吸热墨水喷射3D打印技术可高效率成形复杂高性能塑料零件,对推动3D打印技术批量化应用具有积极意义。文中以惠普公司的多射流熔融技术和维捷公司的高速烧结技术为主综述了吸热墨水喷射3D打印的技术原理、发展历程和应用领域,总结了材料与工艺因素对其成形质量的影响,概述了吸热墨水喷射3D打印材料体系及相应3D打印研究的进展。通过分析该技术目前面临的主要问题,对其未来重点研究方向进行了展望。

    Abstract:

    Heat- absorbing ink jetting 3D printing technology enables the rapid fabrication of complex and highperformance polymer parts, which can boost the large-scale application of 3D printing technology. Based on HP's multijet fusion technology and Voxeljet's high speed sintering technology, the technical principle, development period and application areas of the heat-absorbing ink jetting 3D printing technology were reviewed, the influence of materials and process factors on its printing quality was summarized, the heat-absorbing ink jetting 3D printing material system and corresponding research progress were introduced. By analyzing the current situation of this technology, its key research directions for future development were prospected.

    参考文献
    相似文献
    引证文献
引用本文

孙江涛,张净凯,毛贻桅,王启航,黄志高,蔡道生,魏青松.吸热墨水喷射3D打印高分子材料的研究现状与发展趋势[J].高分子材料科学与工程,2023,39(3):181-190. Jiangtao Sun, Jingkai Zhang, Yiwei Mao, Qihang Wang, Zhigao Huang, Daosheng Cai, Qingsong Wei. Progress on Heat-Absorbing Ink Jetting 3D Printing of Polymers[J]. Polymer Materials Science & Engineering,2023,39(3):181-190.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-05-24
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司