原位反应加工法制备氮化硼/聚甲基丙烯酸甲酯/聚乙烯导热复合材料的性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

湖北省大学生创新创业训练项目(S20231049000);功能材料绿色制备与应用教育部重点实验室(湖北大学)开放基金(202105)


Enhancing the Thermal Conductivity of Boron Nitride/Polymethyl Methacrylate/Polyethylene Composites via In-Situ Reactive Processing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以氮化硼(BN)为导热填料、聚甲基丙烯酸甲酯(PMMA)和高密度聚乙烯(HDPE)为基体,利用甲基丙烯酸甲酯(MMA)的原位反应加工成功制备了BN/PMMA/HDPE高导热复合材料。研究了PMMA与HDPE不同质量比时的相形态,通过扫描电子显微镜发现,当PMMA与HDPE的质量比为9:11时,复合材料构成了完善的双连续结构,BN选择性分散在原位反应加工法制备的BN/PMMA/HDPE高导热复合材料的PMMA相中,这种双连续结构及选择性分散的设计有利于提升材料的导热性能和耐热性能。导热性能测试结果表明,当BN的质量分数为40%时,原位反应加工法制备的BN/PMMA/HDPE导热复合材料的导热系数达到了0.92 W/(m·K),相对于纯HDPE提升了283%,相对于简单熔融共混法制备的BN/PMMA/HDPE导热复合材料提升了接近20%。同时,动态力学热分析表明,在温度为40 ℃时,BN的质量分数为30%时,原位反应加工法制备的BN/PMMA/HDPE导热复合材料的储能模量比简单熔融共混法制备的BN/PMMA/HDPE导热复合材料的储能模量提升了46%,并且差示扫描量热分析及维卡软化点测试表明,其玻璃化转变温度、结晶温度和维卡软化点都有提升。其研究为制备高导热耐热复合材料提供了一种新的方法。

    Abstract:

    The in- situ BN/PMMA/HDPE composites with boron nitride (BN) as thermal conductive filler and polymethyl methacrylate (PMMA) and high- density polyethylene (HDPE) as matrix with high thermal conductivity were successfully fabricated by in-situ reactive processing technique. The morphology characterizations of the PMMA/HDPE co-continuous matrix reveal that when the mass ratio of PMMA:HDPE is 9:11, benefiting from the co-continuous matrix and selective dispersion of BN fillers, the composites not only possess superior thermal conductivity, but also display better heat resistance. Specifically, the thermal conductivity results reveal that the thermal conductivity of in-situ BN/PMMA/HDPE with 40% mass fraction of BN could reach 0.92 W/(m · K). It is increased by 283% compared with HDPE, by nearly 20% compared with the BN/PMMA/HDPE composite prepared by simple melt blending method. Meanwhile, the DMA results show that the storage modulus of in- situ BN/PMMA/HDPE reaches up to 5515 MPa, which gains a increase of 46% against the BN/PMMA/HDPE composite prepared by simple melt blending method at the temperature of 40 ℃ and mass fraction of BN of 30%. Furthermore, by DSC and Vicat softening point test, the glass transition temperature (Tg), crystallization temperature (Tc) and Vicat softening temperature of in-situ BN/PMMA/HDPE composites show prominent improvement. Therefore, this study provided a facile method for constructing thermal conductivity and heat resistance composites.

    参考文献
    相似文献
    引证文献
引用本文

董 姗,唐 敢,金 卉,李 庚,江兵兵,游 峰,江学良.原位反应加工法制备氮化硼/聚甲基丙烯酸甲酯/聚乙烯导热复合材料的性能[J].高分子材料科学与工程,2023,39(4):25-32. Shan Dong, Gan Tang, Hui Jin, Geng Li, Bingbing Jiang, Feng You, Xueliang Jiang. Enhancing the Thermal Conductivity of Boron Nitride/Polymethyl Methacrylate/Polyethylene Composites via In-Situ Reactive Processing[J]. Polymer Materials Science & Engineering,2023,39(4):25-32.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-06-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司