Abstract:Si-MAPP and Si-MMCA were prepared by modifying ammonium polyphosphate (APP) and melamineurate (MCA) with tetraethylorthosilicate (TEOS) and vinyltriethoxysilane (A- 151). And a new intumescent flame retardant (IFR) was obtained by mixing Si-MAPP, Si-MMCA and dipentaerythritol (DPER) and used for LDPE flame retardant. The structure, morphology and mechanical properties of flame retardants and LDPE composites were characterized by FT- IR, SEM, TG and universal material testing machine. The flame retardant properties of LDPE composites were investigated by LOI, UL-94 and cone calorimetry tests. The results show that Si-MAPP and Si-MMCA have excellent hydrophobic properties and good compatibility with LDPE after being modified with TEOS and A-151. And the problem of poor hydrophobicity of APP and MCA was resolved. The flame retardant properties of LDPE composites are greatly improved by adding IFR containing Si-MAPP/DPER/Si-MMCA. FT- IR, SEM and TG results show that APP and MCA were successfully modified with TEOS and A-151 coatings. The flame retardancy of LDPE composites was tested by universal material testing machine, limiting oxygen index, UL-94 vertical combustion test and cone calorimetry test. When 43.75% Si-MAPP/DPER/Si-MMCA was used, the LOI of LDPE composites is 30.3% and reaches V-0 level. And the tensile strength reaches 12.92 MPa, which is 3.79% higher than that of LDPE/IFR without SiMMCA at the same proportion and 6.81% higher than that of 41.6% LDPE/IFR without Si-MAPP. The smoke density tests show that the addition of Si-MAPP and Si-MMCA effectively improves the residual carbon content and thermal stability of LDPE composites, and significantly improves the smoke emission.