离子液体改性石墨烯/丁腈复合材料的摩擦性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Mechanical and Tribological Properties of Graphene/Nitrile Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    为探究不同含量1-羟乙基-3-甲基咪唑四氟硼酸盐离子液体(IL)改性石墨烯(GR)后对石墨烯/丁腈复合材料摩擦性能的影响,文中设置了3种GR与IL的质量比,通过热重分析、扫描电镜表征手段对比分析了GR与IL不同质量比制备的改性石墨烯(GR-IL)的改性效果,并研究了不同石墨烯添加量对复合材料性能的影响。结果表明,GR与IL的质量比为1:1和1:2的GR-IL可以降低复合材料的摩擦系数、磨损及振动加速度总级,在载荷0.25 MPa、转速1000 r/min下干磨2 h后最低质量磨损率仅为0.175%;而当质量比为1:3时,则复合材料的摩擦性能降低;随着石墨烯含量的增加,石墨烯/丁腈复合材料的摩擦性能呈现先提高后降低的趋势。

    Abstract:

    In order to investigate the effect of different contents of 1- hydroxyethyl- 3- methylimidazolium tetrafluoroborate ionic liquid (IL) on the tribological properties of graphene/nitrile composites, three mass ratios of GR to IL were set. The modification effects of modified graphene (GR-IL) prepared at different mass ratios of GR and IL were analyzed by thermogravimetric analysis and scanning electron microscope characterization, and the effects of different amounts of graphene on the properties of the composites were studied. The results show that the GR-IL with a mass ratio of 1:1 and 1:2 can reduce the friction coefficient, wear and total vibration acceleration of the composites, and the minimum mass wear rate is only 0.175% after dry grinding for 2 h at a load of 0.25 MPa and a speed of 1000 r/min. When the mass ratio is 1:3, the tribological properties of the composites will be reduced. With the increase of graphene content, the tribological properties of graphene/nitrile composites increase first and then decrease.

    参考文献
    相似文献
    引证文献
引用本文

程晓林,王源升,王 轩,刘吟松,杨 雪.离子液体改性石墨烯/丁腈复合材料的摩擦性能[J].高分子材料科学与工程,2023,39(4):70-77. Xiaolin Cheng, Yuansheng Wang, Xuan Wang, Yinsong Liu, Xue Yang. Mechanical and Tribological Properties of Graphene/Nitrile Composites[J]. Polymer Materials Science & Engineering,2023,39(4):70-77.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-06-15
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司