反相乳液法聚合制备耐高温体积膨胀聚合物微球
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(05E18080110)


Preparation of High Temperature Resistant Superabsorbent Microspheres by Inverse Emulsion Polymerization
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    以单硬脂酸甘油酯(GMS)为乳化剂、四烯丙基氯化铵(TAAC)为交联剂,通过反相乳液聚合制备了一种耐高温P(AM-AANa)聚合物微球。聚合物微球较优的合成条件是,交联剂和引发剂占单体的质量分数分别为0.8%和0.1%,mAM:mAA=0.5,m白油 :mGM=5,m 水相:m 油相=2,在该条件下合成的微球吸水倍率为68.4 g/g,粒径为原来的29倍。傅里叶变换红外光谱、X射线能量色散谱、扫描电镜和激光粒度仪分析结果表明,聚合物微球具有较好的球形度,聚合物微球在180 ℃时,分别在蒸馏水及在现场水中吸水10 d之后仍保持较好的球形,说明微球具有优良的耐高温稳定性。

    Abstract:

    High temperature resistant P(AM- AANa) microspheres were synthesized by inverse emulsion polymerization using monoglyceride (GMS) as emulsifier and tetraallylammonium chloride (TAAC) as crosslinking agent. The optimal polymerization conditions are the mass fraction of the crosslinking agent and initiator is 0.8% and 0.1% of the monomer, respectively, mAM:mAA = 0.5, mwhite oil: mGMS= 5, m aqueous phase: m oil phase = 2. The water absorption of the synthesized microspheres is 68.4 g/g, and the particle size becomes 29 times that of the original. The structure and properties were characterized with FT- IR , EDS, SEM and laser particle sizer. The results show that the polymer microspheres have good spherical degree and the polymer microspheres have good temperature resistance, such as good spherical shape after absorbing water for 10 d in distilled water and field water, respectively.

    参考文献
    相似文献
    引证文献
引用本文

孙建磊,陈 赛,尹 越,苏雨欣,张尹航,张晓云,孙海翔.反相乳液法聚合制备耐高温体积膨胀聚合物微球[J].高分子材料科学与工程,2023,39(5):10-16. Jianlei Sun, Sai Chen, Yue Yin, Yuxin Su, Yinhang Zhang, Xiaoyun Zhang, Haixiang Sun. Preparation of High Temperature Resistant Superabsorbent Microspheres by Inverse Emulsion Polymerization[J]. Polymer Materials Science & Engineering,2023,39(5):10-16.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-07-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司