Abstract:Selecting butyl rubber(IIR) and polyisobutene (PIB) as raw materials, the influence of PIB content and molecular weight, crosslinking agent, double bonds of IIR on the tensile properties of the crosslinked IIR/PIB systems was analyzed. The results show that in the crosslinked IIR networks, the crosslinking density and stress are reduced but the tensile strength is increased by adding PIB. The tensile strength of the IIR-H/PIB-H(1:1) blend is 3.5 MPa, which is 60% higher than that of the pure IIR-H. By relating the parameter of strain-hardening (EH) with elongation, it is found that EH increases firstly and then decreases with elongation at break, with the maximum value at 350%. Using the nonaffine slip- tube model, the contribution of crosslinking network and entanglement network, Gx and Ge, is obtained respectively. By comparing the dynamic moduli with Gx and Ge, it is found that (G2x + G2e)1/2 hardly changes at the PIB mass fraction lower than 10%, and it increases linearly with complex modulus(G*). Gx increases with storage modulus (G′), but Ge increases with loss modulus (G′′) firstly and then decreases. With the PIB mass fraction of 50%, Ge has a negative relation with G′′ due to different testing conditions.