聚醚醚酮/聚醚酰亚胺合金的热学性能与力学性能
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

中央高校基本科研业务费(2022CDJQY-004);国家自然科学基金青年科学基金资助项目(12202083)


Thermal and Mechanical Properties of Polyetheretherketone/Polyetherimide Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    通过熔融共混和注塑成型的方法制备了不同质量比的聚醚醚酮/聚醚酰亚胺(PEEK/PEI)合金,确定了各种质量比下时的最佳加工温度。采用热重分析、差示扫描量热分析、动态力学热分析和拉伸、三点弯曲的性能表征方法,研究了PEEK/PEI共混合金的热学和力学性能随PEEK/PEI质量比的变化趋势。结果表明,各组分比的PEEK/PEI合金均具有良好的热稳定性;随着PEEK含量增加,合金结晶度呈现上升的趋势,而玻璃化转变温度不断下降;室温时,PEEK含量对PEEK/PEI 共混物的力学性能影响较弱;当测试温度稍低于PEEK玻璃化转变温度时,其力学性能随着PEEK含量的增加表现出降低的趋势;当测试温度在PEEK与PEI玻璃化转变温度之间时,合金的力学性能随着PEEK含量的增加先下降再上升。最后,基于随机森林法量化了合金质量比及热性能参数对PEEK/PEI合金力学性能的贡献程度。

    Abstract:

    Polyetheretherketone/polyetherimide (PEEK/PEI) blends were prepared by extrusion and injection molding, and the optimized processing temperature of the PEEK/PEI blends was determined. The thermal and mechanical properties of the PEEK/PEI blends were investigated by thermogravimetric analysis, differential scanning calorimetry analysis, dynamic mechanical analysis, tensile and three-point bending tests. Results indicate that the PEEK/PEI blends show relatively good thermal stability. With the increase of PEEK content, the crystallinity of each blend shows an increasing trend, while the glass transition temperature decreases simultaneously. Meanwhile, the mechanical properties of the PEEK/PEI blends show a weak correlation to the content of PEEK at room temperature. When the test temperature is slightly lower than the glass transition temperature of PEEK, the mechanical properties of PEEK/PEI show a decreasing trend with the increase of PEEK content. Moreover, when the test temperature is between the glass transition temperatures of neat PEEK and PEI, the mechanical properties of the PEEK/PEI blends first decrease and then increase with the increase of PEEK content. Finally, the contribution of the content ratio of the PEEK/PEI blends and thermal property parameters to the mechanical properties of the PEEK/PEI blends was quantified based on the random forest method.

    参考文献
    相似文献
    引证文献
引用本文

莫小龙,张园园,李元庆,黄 培,付绍云.聚醚醚酮/聚醚酰亚胺合金的热学性能与力学性能[J].高分子材料科学与工程,2023,39(5):118-124. Xiaolong Mo, Yuanyuan Zhang, Yuanqing Li, Pei Huang, Shaoyun Fu. Thermal and Mechanical Properties of Polyetheretherketone/Polyetherimide Alloy[J]. Polymer Materials Science & Engineering,2023,39(5):118-124.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-07-11
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司