Abstract:The epoxy intermediate, synthesized from ethylene glycol diglycidyl ether (EGDE) and Nmethylethanolamine (MEA), reacted with HDI trimer (HT- 100) to produce the polyurethane prepolymer. The prepolymer was then chain- extended and hydrophilically modified with polyethylene glycol (PEG- 1000) and polyethylene glycol monomethyl ether (MPEG-1200). Finally, methyl ethyl ketone oxime (MEKO) was used to block the residual NCO groups, leading to the achievement of the blocked waterborne polyisocyanate crosslinkers containing active epoxy group. The crosslinkers were successfully synthesized by Fourier transform infrared spectroscopy (FT-IR) and nuclear magnetic resonance hydrogen spectroscopy (1H- NMR). The thermal properties of the crosslinkers were studied by TG and DTG, as well as the research of mechanical properties of the cured coatings. The results show that the crosslinkers can be stored stably and are more suitable for acidic system. Through TG and DTG, the optimum unblocked temperature of the crosslinker is 118 ℃. When the mole ratio of hydroxyl contained in MPEG and the hydrophilic modifier is 0.9, the pencil hardness of the cured coating can reach 4H, it can resist acetone wiping 31 times, and the adhesion between the coating and metal can reach 0.56 MPa.