预成型工艺对膨体聚四氟乙烯预制件均匀性的影响
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金资助项目(52233003);四川省科技厅杰出青年人才项目(2022JDJQ0023);高分子材料工程国家重点实验室自主课题(sklpme2021-4-06)


Influence of Preforming Process on the Uniformity of Prefabricated Billets of Expanded Polytetrafluoroethylene
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    膨体聚四氟乙烯(ePTFE)微孔膜是通过膨体加工方法制备的,其具有高孔隙率、高疏水性和良好的生物相容性等特点。其中,预成型是将PTFE糊膏预压形成紧实的预制件坯料。然而,预成型过程中施加的压力会导致润滑油浓度和预制件密度分布不均匀,最终导致ePTFE微孔膜结构均匀性差、力学强度低等问题。因此,文中通过对预成型工艺参数进行研究发现,预成型压力、持续时间和初始润滑油浓度将显著影响预制件的质量,增加润滑油浓度、延长预成型时间和提高预成型压力可提高预制件密度的均匀性。并进一步通过等静压技术提供的多向力场制备出了密度和润滑油分布均匀的预制件,为高均匀性ePTFE预制件的制备提供了新的途径。

    Abstract:

    Expanded polytetrafluoroethylene (ePTFE) microporous membranes prepared through expanded processing have characteristics of high porosity, high hydrophobicity and good biocompatibility. Preforming is to prepress the PTFE paste to form a compact billet. However, the pressure applied during the preforming process will lead to uneven distributions of lubricating oil concentration and preform density, which will eventually lead to poor structural uniformity and low mechanical strength of ePTFE microporous membranes. Therefore, through the study of preforming process parameters, it is found that preforming pressure, duration time and initial lubricating oil concentration will significantly affect the quality of prefabricated parts. Increasing the concentration of lubricating oil, preforming time and preforming pressure can improve the uniformity of preform density. Furthermore, the multi- directional force field provided by isostatic pressing technology was used to prepare prefabricated components with uniform density and lubricant distribution, providing a new approach for the preparation of highly homogeneous ePTFE prefabricated components.

    参考文献
    相似文献
    引证文献
引用本文

张泰然,杨玉良,石玉东,沈佳斌,郭少云.预成型工艺对膨体聚四氟乙烯预制件均匀性的影响[J].高分子材料科学与工程,2023,39(6):36-41. Tairan Zhang, Yuliang Yang, Yudong Shi, Jiabin Shen, Shaoyun Guo. Influence of Preforming Process on the Uniformity of Prefabricated Billets of Expanded Polytetrafluoroethylene[J]. Polymer Materials Science & Engineering,2023,39(6):36-41.

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 录用日期:
  • 网络出版日期:
  • 在线发布日期: 2023-08-14
  • 出版日期:
您是第      位访问者
编辑出版 :《高分子材料科学与工程》编辑部
地址 :四川省成都市一环路南一段24号 四川大学高分子研究所
电话 :028-8540 1653  E-mail:gfzclbjb@vip.sina.com
高分子材料科学与工程 ® 2026 版权所有
技术支持:北京勤云科技发展有限公司