Abstract:To explore the combustion behavior and decomposition kinetics of raw rubber under different radiation heat fluxes, the heat release rate (HRR) of natural rubber (NR), ethylene propylene diene monomer (EPDM), butadiene rubber (BR), nitrile- butadiene rubber (NBR) and styrene- butadiene rubber (SBR) was measured via cone calorimeter. The HRR curves of NR and EPDM at both 15 kW/m2 and 35 kW/m2 radiation heat fluxes are of the single peak type. However, the HRR curves of BR, NBR and SBR change from the single peak type at 35 kW/m2 to the double peak type at 15 kW/m2. The formation of the double peak type HRR curves can be explained by the appearance variation and pyrolysis characteristics evolution of specimens before ignition. For BR, NBR and SBR at the radiation heat flux of 15 kW/m2, the specimen at 5 s before ignition can be divided into multiple layers, and the top surface is composed of rigid char like material. Further, at least one of the layers has a higher char yield and greater activation energy of decomposition reaction than the upper part of specimen at the radiation heat flux of 35 kW/m2. The formation of multiple layers and evolution of pyrolysis characteristics may be related to the fact that the raw rubber stays in the cross-linking reaction temperature range for a relatively long time at the radiation heat flux of 15 kW/m2. However, the cross-linking effect of NR and EPDM is greatly weakened due to the reversion phenomenon, which prevents the HRR curve at 15 kW/m2 from converting to the double peak type.