Abstract:By adding tetrabutylammonium hexafluorophosphate (TBAHP), an organic branching salt, to polyvinylidene fluoride (PVDF) spinning solution, PVDF tree- like nanofiber membranes were prepared by one- step electrospinning method. The effects of TBAHP addition, electrospinning process parameters and solvent volume ratio on the dendrite morphology of fibers were investigated. In addition, the effects of the amount of TBAHP on the mechanical properties, pore size and porosity of the fiber membranes were studied. The results show that when the concentration of TBAHP is 0.05 mol/L, the volume ratio of N, N-dimethylformamide and acetone is 7:3, the voltage is 27 kV, and the receiving distance is 12 cm, the prepared nanofiber membrane has more branched fibers, showing obvious tree- like structure. The fracture stress of fiber membrane with obvious tree-like structure is 4.93 MPa which is much higher than 1.82 MPa of the pure PVDF nanofiber membrane, its pore size is only 2 μm, and the porosity is 90%. The PVDF tree-like nanofiber membrane has broad applications in filtration, oil- water separation, membrane distillation and electrochemistry.